Lincoln Automobiles

xtriggerman
4 min read
Views
1,163
Comments
8
Ever since I posted the article here on how to convert your low beam to 9005' Iv been on a long journey to find modern LED powered bulbs for my 97. I'v bout about 8 sets of various bulbs primarily from Ebay and test their wattage draw and what they look like in the housings. I'll cover the low...
gdbouwman
1 min read
Views
359
I have a 2008 MKZ. The seat heater/cooler failed late last winter and I finally got around to looking at it. Both driver and passenger seat heat/cool were non-functional. Pressing the heat or cool buttons on the dash did nothing. Looking at the control connector under the passenger seat, one...
xtriggerman
3 min read
Views
1,031
Comments
1
With 96K on my 97, I have been thinking about a minor issue it has for a while now and thought it was time to make it better one way or another. The issue starts as a very common problem that all these Gen 2's have as far as my investigating goes. The cooling fans are 2 wire fans but have a 2...
xtriggerman
3 min read
Views
1,549
Comments
1
My 97 had a bad right rear 5x7 JBL so it was time for replacing all of them. I have the premium JBL syatem in the car that includes the upper door tweeters. I wasnt looking for a big up grade, just decent modern replacements that I found in HarmonyAudio.com . I replaced the 4 factory 5x7's with...
xtriggerman
5 min read
Views
1,600
My 97 MK VIII has 84K miles and reading up on the plugs issues on these aluminum heads has put this all in motion. Back in my youth, pulling engines, top end rebuilds and various mechanicals of the sort was never an issue but its been a long time since those days so these newer coil over plug...
xtriggerman
3 min read
Views
3,780
Comments
4
**** UPDATE*** Well folks the earlier Ultimate blender repair article on making the repair & mod of the black broken arm is nearly all but worthless. My above repair lasted a little over a year and the stud on the black arm has snapped off like what you see here on this disintegrated junk yard...
xtriggerman
1 min read
5.00 star(s) 1 ratings
Views
5,587
Reaction score
2
Comments
14
My OEM Low beams craped out with 82K on the car so I was pressed into rigging in a 9005 Hi beam kit. I choose the 9005 at 5000K since I hate the hi power blue lights folks seem to want to blind all the on coming vehicles with these day. Part one for picture size sake.... This modification...
xtriggerman
3 min read
5.00 star(s) 1 ratings
Views
1,549
Comments
1
This can be a real head scratcher if you don't do a bunch of searching and even then the You Tube vid on this off model repair misses some points. The symptom I had was the drivers side power lock was a hit and miss situation. Sometimes the door lock would respond properly and other times it...
xtriggerman
2 min read
5.00 star(s) 1 ratings
Views
2,484
Heres another one of those illusive internet fixes that isn't to easy to find info on. The original problem is that the cruise control is turned off via 3 ways. 1) the steering wheel button, 2) the brake petal and 3) by pressurizing the brake lines. It was thought, if the brake petal switch...
xtriggerman
4 min read
5.00 star(s) 1 ratings
Views
3,855
Comments
5
Finaly got this project finished! All from a creeper no less.... Well I have to agree with Capt Fast since he said if to do again, do the 2.25" rather than the 2.5" system. As I have found out, the 2.5's are just not going to fit tight up along the gas tank. On top of the fact that you really...
xtriggerman
6 min read
Views
2,991
Comments
4
This 1157 mod is a mod that would need a Lathe application. I started out with a 2005 Mustang 6 - 1157 socket sequential harness with 2 marker spade sockets that I bought off Ebay. Then after more reading found one guy on you tube that did a nice looking conversion to sequential but latter he...
xtriggerman
3 min read
Views
4,178
Reaction score
1
Comments
3
Probably the most disliked thing about changing the oil filter on my 97 is the fact that you have to spin it on dry. As every one knows, cold start up is when the bulk of engine wear happens according to the experts. So add a dry filter and you multiply the wear factor several times. So my main...
xtriggerman
3 min read
Views
2,134
Comments
1
This is for the fabricators out there that can handle a little welding, drilling and wiring. The design of the Mark VIII dash board is about as perfect a design as can be for this modification. If you absolutely hate suction cups and spring cords, this might be for you! I'm all about Quick...
xtriggerman
2 min read
Views
2,591
Comments
2
Now I know there all sorts of do dads made for holding a cell phone in a car but who likes that grabber sticking out in a never perfect dash place. So for all you non smokers that like to keep the gizmo holder eye sores out of these sleek dash lines...., this is for you. A fast drop in, grab out...
xtriggerman
2 min read
5.00 star(s) 1 ratings
Views
2,546
Reaction score
2
Comments
2
These old car do not lac for surprise repairs! While in the process of swapping in an all aluminum Radiator, I thought I would check on the thermostat housing since it was dripping coolant. Mind you, this 1997 car only has 69K miles on it but as the saying goes, rust never sleeps. My first...
xtriggerman
2 min read
Views
1,963
To some this may sound petty, but engineers spend a lot of time on giving a car a "feel" to the controls. As all of you know, the resistance on the air vent dials is non existent. Sort of reminds me of Pinto quality. The good thing is, the design lends its self to a very easy fix once you have...
xtriggerman
2 min read
Views
1,805
Reaction score
1
As a new Mark VIII owner, I'm coming to realize PVC cement & 3m emblem tape are both key items to hold these cars together! The plastic on my FL car is extremely frail and many of the plastic studs are gone. If you infact still have your door light lenses with original bulbs, this post is for...
xtriggerman
7 min read
Views
4,096
Comments
4
Being a trained Gunsmith, rule #1 is before you can fix any thing, you need to know exactly how it was designed to work and why it failed. That's why I have tried to explain this repair to the extent that you need not piece together bits of info from a variety of sources as I had to to learn...
xtriggerman
2 min read
Views
3,651
Reaction score
2
Comments
1
I did a novel rear shock install with my coil spring conversion. I wanted the ability to raise the rear a bit if need be or like some, might want to hall some weight. The fix is get a pair of Monroe MA815 Max air shocks with that air line kit that comes with them. The only thing you will use off...
Back
Top