Search results

Just wondering the relay for the wiper motor under the hood of the car is labeled Relay #1 and I look under the hood and there is nothing in the relay 1 slot and I put a spare in there and there is nothing for the relay to connect too Wipers don’t work and out of nowhere my wipers stopped working.

Did my rear brakes and couldnt for the life of me figure out how to release the parking brake module (the cable that hooks onto the module itself) so i removed the caliper completely and now I cannot get the cable back onto the module. Any help would be much appreciated. 2005 LS 3.0

I have recently having issues with my fob, once the car goes to sleep, I am not able to unlock my car with the fob, thankfully my door lock module is broken so it never locks the door automatically so I am able to put the key in the ignition and when I turn the key to accessory, the fob works...

Just changed my oil with mobil1 5w20 and noticed when it got up to normal temp there is a knocking sound on my driver side valve cover, I did use cheapo coils this time around but I noticed my oil was a bit low when i drained it, I read a valve adjustment could be the issue, I also notice my...

Does anyone have a work shop pdf or write up on how to remove the upstream o2 sensors? It seems mine are wrapped up along part of the upper suspension with black tape or something.

Just threw in new coils and plugs and buttoned everything back up and noticed this little guy just hanging out behind my intake... I didn't take pictures or have the book so hopefully, someone is able to help me out, I don't really want to take the intake off again. Thanks in advance! 2005 3.0

Well looks like my cowl was warped a bit and leaked water into my plug wells but I noticed there was some oil in the wells as well. New felpro kit when I changed my coils 1.5 years ago so I am assuming the broken bolt i replaced with a home depot bolt is the culprit(hoping) and I didnt use RVT...

My accident wasn't as bad as I thought. Going to fix the rad support and leave the metal crash bumper. The driver side is pushed in about 3/4 of an inch so im going to get a new styrofoam impact insert and glue some thin strips of styrofoam to build up the driver side so my bumper will sit...

Some of you know I was in an accident with my LS, Insurance is not writing it off and they are still estimating the cost of a new front bumper, the actual metal bumper under the cover, the plastic radiator support, and the front end crash sensors. I need a pdf or access to a program that has a...

Got a very light bump from behind and bumped the guy in front of me. Bumper has a crack but no airbag deployed and the actual metal bumper has a tiny dent and the styrofoam bumper cover insert broke in half and fell out on the highway. I ran forscan and now i have some codes lol.... I know i...

Well I finally purchased a new door lock assembly for my driver side.. ( 3 failing ) I removed the bolts and the wires but there is a little yellow clip that connects the rod coming from the door handle to the assembly it self. Im so stumped I dont know what to do lol.

So I broke the clips on my window assembly a while back and havent been able to roll up my window. Now I removed the entire assembly and disconnected the motor from the cable and assembly it self because the motor still works. Now I see that it is a Bosch 12 v motor with the product number 0 130...

Ive had a CEL come up for the P0430 code so for the past few days ive been trying to determine if I have a vaccum leak or something along those lines.. I read on here it could also be a bad coil/s... I just put in motorcraft coils and plugs last year but knowing the coil issues we have with our...

Well I noticed a nice puddle of coolant under my car between the rear of my front left tire and the jack point where the fender meets the door. Is it a bad degas bottle? The car hasnt overheated and it seemed to stop for now.. I have noticed some hissing noises the past couple of days so I...

I have searched and searched and searched for any issues with using LEDs in the gen 2 tail lights, I making a ebay order and wanting to grab some LEDS for my tails, I know about the resistors on the gen 1s but cannot remember if I need to solder resistors in the gen 2s?

Bought a brand new battery car runs great, all the lights and super bright etc but when i turn the car off the anti theft light doesnt flash and my fob isnt working...... I have door panels and switches removed and disconnected and passenger door lock assembly that is broken/party removed so I...

wondering why no codes are showing up on the elm 327 OBD2 scanner? I have a bad dccv, bad door lock assembly and still no codes show up... P1000 - (OBD testing not complete) no codes as well with the torque lite app either. I used an innova obd tool and it detected a cyl 6 misfire about a year...

wondering why no codes are showing up on the elm 327 OBD2 scanner? I have a bad dccv, bad door lock assembly and still no codes show up... P1000 - (OBD testing not complete) no codes as well with the torque lite app either. I used an innova obd tool and it detected a cyl 6 misfire about a...

Little battery question here... I pulled out the fuse for the map lights and courtesy lights so i can keep my battery hooked up over night so i can see if I actually need a new battery. I put multi meter leads + and - on the + and - battery terminals and it was reading 14.38. Is that too much...

Well I only have one mirror hooked up right now and when i turn my car off the passenger puddle light on the mirror stays on and it will kill my battery.. what would cause this? faulty door lock assembly? my door ajar sign isnt on but it comes on every once in a while.