Search results for query: *

So i've finally got around to un-spring converting the LSC that I picked up in Houston. School's out & the kiddies are at Grandmas, Yippee! Lucky for me the air lines were the only things that were cut. Unfortunately, while trying to disconnect the upper control arms from the spindles up front...

I'm working on a buddys 97 LSC that had a ball joint failure & ripped the wheel speed sensor out. I noticed that his seats won't move at all. However, the easy entry is on & when you remove the keys from the ignition, the drivers seat will move for just a second. Anyone ever had this issue? If...

I was curious about what exactly is done when a tune for 87 octane is put on a Mark. I had this option on a switch-chip on my 95 & used it often back in 08 when gas was sky-high. But that chip was bought from a vendor who doesn't actually do his own tuning. I learned my lesson on that one...

So Friday I found an exhaust shop to set up the 98 base with a real dual exhaust for $300. They were the only shop that I could find that was cool with removing the dreaded 3rd cat. They also fabbed up a quality H-pipe for me. I went with 2 1/4 & saved a few bucks. I thought it would be a little...

Looks clean. http://nashville.craigslist.org/cto/1557014625.html nice but too much http://nashville.craigslist.org/cto/1534005768.html

This was my wifes car, it became mine by forfeit. It's been sitting under a cedar tree for a nearly a year. It's a 98 with 84,XXX miles on it & a perfect air ride. I sold my 95 to my 18 year old brother. I just sensor lowered it & buffed the headlights. I still need to get my trac-lock & sway...

It has come to my attention that there are a few of us in the KY/TN area that are relatively close to each other. That being said, I'd like to see if there's any interest in putting together a mini-meet somewhere in the middle. I myself am in Nashville but that is a hop & a skip away from...

I plan on doing this Tuesday, any advice on where to mount this thing? Also, are there any real advantages to using the dual filter setup? Thanks.

Who's making the trip this year? I plan to be there, as long as i'm still employed.:eyeroll:

Does anyone have a chip from them? According to their website, the cutsom 3way switch looks like it has about 25 different options.http://supercoupeperformance.com/partBrowser.aspx?partId=320 Does the LMS chip have the same capabilities? I want to get the most options for my money here.I've...

Last week I cleaned out my MAF and throttle body and now it's idling high. Normally, it idles at around 600 and now it's at 800-900. No CEL. Any ideas?

Do they know about us?