The gnome that knows.
- Thread starter LaserSVT
- Start date
Various vac lines from 1/4-3/4"
Various couplers in same size
Few vac T connectors
The Right Stuff gasket maker
Mod throttle bracket
Move cruise assembly
Mod alt bracket
Mod T-body to not flow through
Remove EGR (must do)
Remove EGR lines and vac valve (must do)
Lengthen IAC, IAT, TPS wires
Shorten MAF wires
Colder spark plugs
Cobra intake tube (96-98)
Cut a couple studs on lower block
Cobra fuel rail (96-98)
Cut hood
Filter bracket
Remove DPFE
Remove IMRC controller
New plenum to block gaskets
New T-body gasket
New IAC gasket
Full dyno tune (absolute must!)
90mm MAF
42lb injectors
4" coupler
3.5" connecting tube
Conicle filter
MAF adapter ring
108-110" belt
alltogether about 6000 now on to build the bottom end right?..... damn im taking a trip to come see this beast in person becfore i start uti here in NC and if it ok just go for a test run and see if thats what i really wanna do... is that ok
JDS353
Dedicated LVC Member
lazer take the time to put a larger fuel line to the railes you might have a higher pressure but not the volume to feed the top end. jds
MarkVIIIS
Dedicated LVC Member
I'm taking my underdrive pulley kit off this weekend and putting my stock pulleys on for my supercharger, I don't know how much your looking to spend
Bill,
Thanks for having lunch with me yesterday, BTW, you were right, something was not right, my tummy was jacked up all night lastnight.
Plus after you left, I wound up standing in the rain for an hour and a half at the accident scene, not like it did a damn bit of good, the officer had already made his mind up who was in the wrong, and it was the wrong person he faulted.
I had a throw down with him in the middle of the street over it.
When the husband (millitary guy in the red K5) of the lady in the mini van asked me what I said to the officer, I told him his wife was a piece of $hit driver, and that I could give to $hit's what happened to her, for putting others on the road, and the three kids inside the mini van at risk, all because she was in a hurry.
He freaked, I said it's not my fault he married a no driving, lieing <unt for a wife, but to put that many people in harms way was bull$hit.
He stood there in the rain in amazement as I left.
Thanks for having lunch with me yesterday, BTW, you were right, something was not right, my tummy was jacked up all night lastnight.
Plus after you left, I wound up standing in the rain for an hour and a half at the accident scene, not like it did a damn bit of good, the officer had already made his mind up who was in the wrong, and it was the wrong person he faulted.
I had a throw down with him in the middle of the street over it.
When the husband (millitary guy in the red K5) of the lady in the mini van asked me what I said to the officer, I told him his wife was a piece of $hit driver, and that I could give to $hit's what happened to her, for putting others on the road, and the three kids inside the mini van at risk, all because she was in a hurry.
He freaked, I said it's not my fault he married a no driving, lieing <unt for a wife, but to put that many people in harms way was bull$hit.
He stood there in the rain in amazement as I left.
ripped camel
Dedicated LVC Member
lincolnboy
Dedicated LVC Member
The gnome getts around WW http://leberpr.blogs.com/.a/6a00d83451823769e2011571fd1ce0970b-500wi
Im lookin for free!
IDK, PM me what ya want and some pics so I can see what shape they are in.
I need it ASAP but dont know if I can afford it tomorrow or not. Tomorrow is my birthday so maybe I will get some cash...... not likely but I can dream.
Very happy and suprised really. Car runs great and behaves well. Trans shifts like crap but that will be changed here in the next week or so.
Wow, I kinda saw that happening though. You are not supposed to pull out and make traffic slow down. Thats the rules. She was an idiot and was prolly on the phone cause she was going way too fast for as far as she spun but thats the way it is.
And yeah, the burger gave me teh poos. Told ya it didnt taste right.
18 wheeler was making a left turn onto a 4 lane road. Had room if the van had been doing the speed limit or even tried to slow down but she didnt. Truck was half way through and she dived into oncoming traffic lanes but clipped the front of the truck. She spun through the intersection and then for another 100' or so. Was in a new Nissan Quest with kids in the car.
Well I fixed the noisy crickett under my hood with a new pulley today. Was gonna order a March underdrive crank too but between overdrafting my account a whole bunch and my boss docking me $200 pay I guess it will have to wait till next check. With the lower boost I may get away with not buying a BAP.
jrherald420
Dedicated LVC Member
Yes
jrherald420
Dedicated LVC Member
Yes
94m5
Dmaup's Daddy
You could also dual pump it....... Like I did on the cheap.
I spoke to the tuner and he said my pump will be more then enough for 12-13lbs of boost. So I will just swap the pulley and IAC then go back for a retune. Gonna be another $150 though.