Black Sentas

I guess these are for coffee table legs?

LOL, I just got the center caps back for them yesterday. I had them painted with my grille an wings west spoiler. Weather has been crappy and I have been super busy with school. Wednesday it is supposed to be nice so I will likely be putting them on then. Still need tires. I'm thinking 235/35/R20.
 
not sure how the roads are where you're located, but xford seems to run that size with no issues.

I ran 245/35 on my sentas, and although rubbing was minimal, it was annoying at times. So if i had to do it again i probably would go with 245/30 eventho the roads around me are sh!t.
 
I would not go with a 30 series side wall. That's WAY to risky! Stick with the 235/35's or 245/35's.
 
i currently have 245/35ZR20's and there is no rubbing at all. but my car is not lowered YET! (not sure if yours is) tires fit nicely and look good.
 
Tires

I got the tires put on today and Wednesday, I will put them on the car. I want to touch-up the calipers and clean in the wheel wells so I have to wait till I have a lot of time on Wednseday. I went with 245/35R20 because they were a lot cheaper and the sidewall on the 30s was dangerously small. I attached a pic, it is crappy but you kinda get the idea of what they will be like on the car.

tires1.jpg
 
I run the same size wheel/tire combo and have for 5 years. Save yourself some frustration(ever so slight wheel shake) and put a camber kit in now and go get it aligned.

It is worth the money. Bought mine through Napa.
 
I run the same size wheel/tire combo and have for 5 years. Save yourself some frustration(ever so slight wheel shake) and put a camber kit in now and go get it aligned.

It is worth the money. Bought mine through Napa.

I had the car lowered about two weeks ago and after they aligned it, the front camber sits at (Right) -0.54 and (Left) -0.19. Both are within specs. The rear is also within sepcs at -1.58/-1.68 but is non-adjustable. I will see if I have wheel shake after I put the wheels on and if so, I will look into the front camber kit.
 
BLAH, BLAH, BLAh..................... Just get them on and get pictures already......... I REALLY want to see them on......... Just put them on and take a picture......... PLEASE!!!!!!!!!!!!!!!!!!:D....... I will give you a cookie.:D
 
BLAH, BLAH, BLAh..................... Just get them on and get pictures already......... I REALLY want to see them on......... Just put them on and take a picture......... PLEASE!!!!!!!!!!!!!!!!!!:D....... I will give you a cookie.:D

Lol, Wednesday, I promise!
 
That's gonna look good!! I can't remember, is your car blacked out in the grille and rear surround?
 
Wow!!! Those aren't even on & they already look so sick! You need to put them on already.
 
It is an 06 so it is color matched. I just installed a McLaren grille so it will be totally blacked out except for the chrome strip in the lower grille, the emblems, and the exhaust tips.
That's gonna look good!! I can't remember, is your car blacked out in the grille and rear surround?
 
I got the tires put on today and Wednesday, I will put them on the car. I want to touch-up the calipers and clean in the wheel wells so I have to wait till I have a lot of time on Wednseday. I went with 245/35R20 because they were a lot cheaper and the sidewall on the 30s was dangerously small. I attached a pic, it is crappy but you kinda get the idea of what they will be like on the car.

looks photoshopped :shifty: I can see the old wheel behind it still :D

get those things on already
 
looks photoshopped :shifty: I can see the old wheel behind it still :D

get those things on already

In that picture, I just set one of the wheels next to the car after I got the tires put on to see how they might look. I will be waking up early tomorrow and putting them on. Finally!! LOL
 
This is gunna look dirty. Before I got my wheels I wanted to black out Sentas like this.


We are finally going to see how this looks!


Will be F5ing the sh!t outta this thread tomorrow.
 

Members online

No members online now.
Back
Top