Jaguar Wheels Fitment Database

Nice find! Great looking wheels, on my list before I found the volvo's.

You could have a few mm shaved off the back of the wheel's mounting face to get a hugher offset. I was reading a little on this and sounds like 5mm is the highest shops will take off.
 
LCN-270-19-SLV-5.jpg


Who has these on their LS again ?

SKU: LCN-270-19-SLV

http://www.usarim.com/lincoln-wheels-sku-270-19-inch-silver-with-machined-lip-rims-p-1671.html

I need to know about off-set on these.
 
I looked at these the other day. I wanted to see if they were available for Jay STR fitment as I want 9.5 rears. I think I have to stick with 18s though.
 
Thanks Ben, there was another member on here that had bought the last set from USARim.

http://www.usarim.com/lincoln-wheels...ms-p-1671.html

Tru hasn't been on here since mid June 2012. I send him a PM.

looks like he needed hub rings ?


these rims are more affordable then the TSW's I was going for,
and they are back now at USARim, so I better get them before they run out again.


http://www.wheelwarehouse.com/p-5210-tsw-wheels-valencia-gloss-black.aspx

5210.jpg


or ...

alloy-wheels-rims-tsw-5-lugs-valencia-silver-std-250.jpg


alloy-wheels-rims-tsw-5-lugs-valencia-chrome-std-250.jpg


available @ http://www.tsw.com/alloy_wheels_valencia_5.php

Trouble is on 19x8 lip is 1.5" and on 19x9.5 lip is 3.0"
there is no 19X8.5 available in these.

I also like the TSW Snetterton's where 19X8.5 is available.
http://www.tsw.com/alloy_wheels_snetterton.php


now these, at USARim, seem very simular to the TSW Valencia's

LCN-270-19-SLV-3.jpg


and in Tru's pics, the lip seems just the right size.

P1000720.jpg


looks like he mentions +48mm and hub rings.


EDIT: says: Center Bore: 65.1 Anyone know if I need hub rings ?
 
You dont need to. You can use them like that but if you get some vibration you can always get the rings later.
 
I know they're not Jaguar wheels but I couldn't pass these up. I've developed a habit of stopping of by at random tire shops and asking if they had OEM Jaguar wheels. They brought these out Makaveli Caprice 20"x9 that they took off a Jaguar. I know 20's and chrome are not everyones cup of tea. I called makaveli and asked for a qoute on the wheels. 3200 for the set. I picked these up at 150 for the set. Two wheels slightly bent and minor curb rash. Got a qoute to straighten and refinish all four another 400. 550 total not a bad deal I think. Just an idea for those looking to find wheels. I haven't refinished the wheels as I may change the color any ideas would be considered


http://i1058.photobucket.com/albums/t412/soundwaves454/2012-12-06_10-57-55_554.jpg
 
as you said, not everyone's cup of tea but not bad IMO. Are you sure that refinishing quote is accurate considering these are chrome?

EDIT: also did you make sure they are the right bolt pattern? Jags didn't always have a 5x108 bolt pattern.
 
I've cleaned 3 so far and the "face" seem to be intact. The lips are polished so I may be able to do something different.

Yea I tried them on forgot to take a pic. Also forgot to mention these are a three piece set I'm concerned that when I drop it it may rub, I can " change " the offset right?
 
Can you change the lips in a 3 piece wheel? I want some eibachs too. I read through the thread, Probably missed it, but has anybody ran 20x9 in the front? Might affect the handling?
 
Can you change the lips in a 3 piece wheel? I want some eibachs too. I read through the thread, Probably missed it, but has anybody ran 20x9 in the front? Might affect the handling?

You can change the lips, but that's not going to affect offset.
 
I don't think these have been posted in this thread

19 inch XJR "Performance" Double 5 Spoke
Wheel size: 19 x 8.5
Bolt pattern: 5 x 108
Finish: Painted (also available in chrome)

My experience so far has been great love them so far.

8349693991_ac95e7d053_c.jpg


8349699697_e2bb8727a4_c.jpg


8350740426_d8c776d079_c.jpg
 
Nice. I know a member has them, but yea don't think he posted them here. Looks nice. So do you have 2 tone gen I tails or a genII conversion back there?
 
Nice. I know a member has them, but yea don't think he posted them here. Looks nice. So do you have 2 tone gen I tails or a genII conversion back there?

Thank you T-$$$$...yea luke I believe has them and me on LVC.....Come on brotha!! I have the rare Gen 1 two tone tails :D
 
got my sentas today and i put my center cap from my 06 ls chrome wheels on them just to see the fit and they dont seem to fit good or snap in. is that normal for the lincoln centers to not fit right? would the reg silver ones fit better or should i just get the jag centers? i just dont want to lose a center cap while driving.
 
got my sentas today and i put my center cap from my 06 ls chrome wheels on them just to see the fit and they dont seem to fit good or snap in. is that normal for the lincoln centers to not fit right? would the reg silver ones fit better or should i just get the jag centers? i just dont want to lose a center cap while driving.

Like this???

LS027.jpg
 
yeah it looks like that its just the cap didnt "snap" in like they normally do. so i guess they will fit fine then. thanks.
 
I just weighed my Sentas..

63# with 255/35/20 Nitto Motivos

Weighed my factory 16's with 215/65/16 Hankook I ice

43#
 

Members online

Back
Top