hite337
Hite Performance
I am now taking orders for custom gen1 V8 heatshields. I have heatshields for the factory intake tube and the LSK intake tube. I am including a rubber gasket to fit between your factory MAF housing and the back of the heatshield. I will try to get some instructions printed to include in the box but if not, I will do a write up and post it here on LVC.
These heatshields are exclusively for LVC members. I am not putting them on ebay or advertising them anywhere else. This is me helping out my fellow LVCers. I am not getting rich selling these heatshields.
You will need to buy a MAF adapter that has a 3 1/4" opening such as the Spectre 8145 or, if you have the KKM intake filter and MAF adapter, that will work also. You will also need to purchase a cone filter that will fit your MAF adapter.
Some minor trimming may be needed but the fit should be good without altering the heatshield. The ends of sheetmetal can be sharp and cut flesh like a razor so be careful.
To purchase, PM me your email address and let me know which intake tube you have and I will request $40 from you via PayPal. Pay your $40 and I will send you a heatshield. I am using PayPal so we are both covered. If you have any question just shoot me a PM. Orders received by friday will be shipped by the following wednesday.
Once again....THESE ARE FOR GEN1 (2000-2002) V8 LINCOLN LS's ONLY!!
This is what you'll get.......
Heatshield for the LSK intake tube
Heatshield for the factory intake tube
These heatshields are exclusively for LVC members. I am not putting them on ebay or advertising them anywhere else. This is me helping out my fellow LVCers. I am not getting rich selling these heatshields.
You will need to buy a MAF adapter that has a 3 1/4" opening such as the Spectre 8145 or, if you have the KKM intake filter and MAF adapter, that will work also. You will also need to purchase a cone filter that will fit your MAF adapter.
Some minor trimming may be needed but the fit should be good without altering the heatshield. The ends of sheetmetal can be sharp and cut flesh like a razor so be careful.
To purchase, PM me your email address and let me know which intake tube you have and I will request $40 from you via PayPal. Pay your $40 and I will send you a heatshield. I am using PayPal so we are both covered. If you have any question just shoot me a PM. Orders received by friday will be shipped by the following wednesday.
Once again....THESE ARE FOR GEN1 (2000-2002) V8 LINCOLN LS's ONLY!!
This is what you'll get.......
Heatshield for the LSK intake tube
Heatshield for the factory intake tube
Last edited: