stooopid question

[dangerDave]

ok guys i have a 96 lsc with factory hid,,,on of my hid bulbs has went out and im interested in a kit to convert it over to a standard hid bulb,,,are there any recommendations here as far what bulb to choose and will one of these kits fix my problem?? please any help is appreciated

 

[keatonsdad]

I dont want to sound like a D!CK but this has been covered more times than a midget porn star being checked for STD's. This will help you decide http://www.lincolnvscadillac.com/search.php?

 

[DLF]

http://www.lincolnvscadillac.com/showthread.php?t=62525

 

[k9t8m]

www.ddmtuning.com

 

[dangerDave]

Ok thanks for the response guys but i have to ask>>do i need the delrin adapters as well as a HID aftermarket kit?

 

[chicken]

if you have hid housings you need an adapter

 

[BAD97LSC]

if you have hid housings you need an adapter

not so chicken, duct tape, wood glue, 5 minute epoxy, even liquid nails in a 1 gallon can will all work, it all depends on who wants to do what the right way!

 

[LaserSVT]

not so chicken, duct tape, wood glue, 5 minute epoxy, even liquid nails in a 1 gallon can will all work, it all depends on who wants to do what the right way!

I use bubble gum.

 

[chicken]

not so chicken, duct tape, wood glue, 5 minute epoxy, even liquid nails in a 1 gallon can will all work, it all depends on who wants to do what the right way!

ok fine, chew up some bubblegum and glob it on there its fine....

I use bubble gum.

bastard!

 

[LaserSVT]

:lol:

 

[LaserSVT]

Looking at this thread makes it appear like almost everyone has Saleens. :lol:

 

[DLF]

Ok thanks for the response guys but i have to ask>>do i need the delrin adapters as well as a HID aftermarket kit?

You'll need some way to hold the aftermarket HID bulbs in the HID housing, my adapters make it easy.

 

[chicken]

looking at this thread makes it appear like almost everyone has saleens. :lol:

lmao!

 

[97MarkJA]

Out of curiosity is anyone running HID's in the high beams on a gen2?

 

[NoLimit95]

Out of curiosity is anyone running HID's in the high beams on a gen2?

Seems like someone on here is, maybe a couple.

 

[dangerDave]

guys do i need the full kit with ballasts or will the factory ballast work(not even sure if it has ballasts) i just dont want to buy something that doesnt work for my car,

 

[DLF]

You need a complete kit with new ballasts, the factory ballasts are not compatible with the newer aftermarket HID bulbs.

 

[96_Lincoln_LSC]

ok guys i have a 96 lsc with factory hid,,,on of my hid bulbs has went out and im interested in a kit to convert it over to a standard hid bulb,,,are there any recommendations here as far what bulb to choose and will one of these kits fix my problem?? please any help is appreciated

DLF may have adapters, I do not know if the housings are the same opening as the 97 , 98's.If they are the His Adapters are top notch. He is very detail oriented. If you want them he's the one Id recommend.

Good luck.
Bill

 

[FASTLLS]

Looking at this thread makes it appear like almost everyone has Saleens. :lol:

ROFL! :lol:

 

[cadillackman]

Are the hid bulbs the same between 1st & 2nd gens?

 

[chicken]

Are the hid bulbs the same between 1st & 2nd gens?

yup all the same bastard bulb

 

[danny_holtermann]

lol and there is a 4th with saleens,

 

[DieselDan]

I used a slightly larger rubber o-ring on my bulbs and it holds them in perfectly. No adaptors, no glue.