My Gen 1 Stock Halogen vs HID + Housing reconditioning

SCIONE

LVC Member
Joined
Jan 24, 2009
Messages
45
Reaction score
0
Location
Lawrenceville, GA
Here are some before and after pictures of a Gen 1 with the new headlights recondition and new HID light installed. I took pictures trough the complete process as per 93' Blue on blue did in his post. I will post these later on if the are desired.

Before:
IMG_0945.png

IMG_0946.png

IMG_0947.png


After:
IMG_0974.png

IMG_0991.png

IMG_0976.png
 
Looks good, SCIONE!

Isn't re-chroming fun? Lol.
 
I will be trying to do a restore on my lenses tomorrow. The chrome is fine but the lense is getting hazy. I have some Mothers clear plastic crap but it does not seem to do much so tomorrow I am gonna put a Lake Country orange pad on my Porter Cable and use it to work the stuff in and see if it helps. If it does okay then I can glaze and polish it. Hope it works as I dred sanding and then clear coating them.
If I do that then I will prolly hit them with two coats of VHT before the clear.
Now if that turns out nice I will be tempted to do the tails too. :D
 
terry only one set was for money, one set is to play with myself, and the other is on the 96 i bought thats getting parted, so no 300 bennies here.
 
terry only one set was for money, one set is to play with myself, and the other is on the 96 i bought thats getting parted, so no 300 bennies here.


I forgot about the set that was swapped for the sills and the other Mark that isn't going to be parted until the shop moves. Well hell, what about glassing a tube for me? No rush on it but when you have time, I'll send it to you as long as it doesn't cost me a bennie.

one set is to play with myself
lol
 

Members online

No members online now.
Back
Top