Looking for Odd Parts - anyone got?

[BodyByAAS]

I need a few odd parts for my mark to make it perfect on the inside!

The interior is tan first off.

1.) Drivers Side Seat control panel. Mine broke off at the front so its just hanging.. Previous owner had a large arse!

2.) Both sun visors, drivers got torn from garage opener. Passanger is bent

3.) Buttons for all windows/doors. I have the pieces with the Chrome" lips, but not sure how to reassemble or if I even can. Might just need replacements

4.) Panel cover for Sunroof Motor.

5.) Headlights since my restoration kit didnt do :q:q:q:q

Anyone got any of these?

 

[96_Lincoln_LSC]

I need a few odd parts for my mark to make it perfect on the inside!

The interior is tan first off.

1.) Drivers Side Seat control panel. Mine broke off at the front so its just hanging.. Previous owner had a large arse!

2.) Both sun visors, drivers got torn from garage opener. Passanger is bent

3.) Buttons for all windows/doors. I have the pieces with the Chrome" lips, but not sure how to reassemble or if I even can. Might just need replacements

4.) Panel cover for Sunroof Motor.

5.) Headlights since my restoration kit didnt do :q:q:q:q

Anyone got any of these?

Sorry cant really help with the interior parts but, What restoration kit did you use for the headlamps? or which method did you use?

 

[BodyByAAS]

Sorry cant really help with the interior parts but, What restoration kit did you use for the headlamps? or which method did you use?

Im pretty sure it was this turtle wax sh*t - didnt really do anything but get white crap all over my paint. I was going to take a power drill and rig up something - any suggestions for a better way to handle this? Mine arent HORRIBLE.. but they are a bit yellow/rough

 

[My Great 8]

Give me a call. I probably have everything you need. Did you lose my number?

 

[BodyByAAS]

Give me a call. I probably have everything you need. Did you lose my number?

Crap no I got it... I just forgot you!! hahah =/ Sometimes the easy answer is the hardest to see.

I was working on the Mark all night Friday, but next Friday Ill take a swing up to the car show and we can meet. You gonna shoot over?

 

[96_Lincoln_LSC]

Im pretty sure it was this turtle wax sh*t - didnt really do anything but get white crap all over my paint. I was going to take a power drill and rig up something - any suggestions for a better way to handle this? Mine arent HORRIBLE.. but they are a bit yellow/rough

I used this kit and will use it when ever anyone has a issue with dull or yellow lights..
its pretty cheap and easy to use just make sure you have a good drill and steady hands.. oh and dont do what I did and try this on the car... (I'm and A$$) take the lights out first.

Good luck its easy.

http://www.aircraftspruce.com/catalog/cspages/3MHeadlightRestoration.php

 

[keatonsdad]

the 3m kit works wonders just make sure to mask off the area around the lights!

 

[My Great 8]

I may be there. Just give me a call. All my stuff is in my storage area in Tamarac.

 

[BodyByAAS]

I may be there. Just give me a call. All my stuff is in my storage area in Tamarac.

Ill give you a buzz tonight

 

[My Great 8]

Great!

 

[ripped camel]

Wet sand them. I did a 3 stage wet sand, then finished off by using Meguiars Plasicx with a powerball hooked to my cordless drill. Came out much better!

 

[LSC HUNTER]

I used the 3M kit which is a three stage. No trying to figure out what grits to get. Just follow the instructions and mask it off!!!

 

[ripped camel]

I used the 3M kit which is a three stage. No trying to figure out what grits to get. Just follow the instructions and mask it off!!!

3m didn't work for me. It depends on how bad your lights are. It's kind of hit or miss. How bad were your lights? Did it come out like new?

 

[LaserSVT]

 

[BAD97LSC]

bring it up here i'll make the lights look brand new, i'll do the valve cover gaskets, and rich can come with you and pick up his octastars and we'll all get drunk!!

 

[NoLimit95]

Ill give you a buzz tonight

That sounds like what's called a "safety meeting"

 

[ssmoparviii]

the 3m kit works wonders just make sure to mask off the area around the lights!

I agree with that... I just brought some 96 LSC headlights back to life before putting them on my 93... They look almost brand new.

Before

After

Both after at night

3M kit rocks!!!!