Delrin Bushings lower control arm and knuckle

lsc8

Dedicated LVC Member
Joined
Sep 13, 2005
Messages
1,073
Reaction score
2
Location
Havanna
Hey everyone,

I've had several request lately for Delrin Bushings, and am wanting to try and get a group buy together. I had made a test set almost a year ago for 94m5 and after installing them aprox 6 months ago, we are ready for a production run. We are making the rear lower control arm and knuckle sets of delrin bushings with hard lube coated pins for aprox. $400, IF we can get ten orders. Once there is enough interests in at least ten orders I will get a set price and will most likely ask for a small deposit in order to make sure of an accurate number of orders.
 
This is a HELL OF A DEAL for this setup. The increased tire control and ride quality is incredible.

This is a few pictures of the prototype set that is currently installed on my 97. I will have it availible in Boscobel next weekend for everyone who's there to sample the benefits they provide.

If you can afford them, by all means get them, you won't regret it,


456602_10152008489120533_1339552045_o_zpse48f6c53.jpg


210123_10152008165350533_399214173_o_zpsc7fe11c5.jpg


463754_10152270719685533_954922831_o_zps705ab9a6.jpg


469085_10152281160590533_676010266_o_zpsdec671c1.jpg
 
Not doing the subframe bushings at the moment but plan to in the future.

Will be asking for something like a $50 deposit to make sure of an accurate order.

Lube coating is aprox a 2 week turn around. Not sure that we could get material etc and get them turned out by the end of July.
 
He had a nice one from Grizzly that I recall. Mine is a 40's Sheldon... Well used, but works like a champ.
 
oh good. this means there might be someone still making these when i have money sometime in the distant future.
 
Not doing the subframe bushings at the moment but plan to in the future.

Will be asking for something like a $50 deposit to make sure of an accurate order.

Keep us updated, I'll PM you my contact info so you do have to find me in a forum
 
Dont count on me anymore. I don't see having the money anytime soon.
 
getting material scheduled for mon. and I am going to start on these. We are 2 short of the ten orders needed but a few members are needing them in a more timely manner. Will have all the shipping quotes and a set price on mon. I will then need a $50 deposit and a measurement for your top knuckle bushing.
 
I'm in.

Question: What are "hard lube coated pins"? Does this mean no need for zerk fittings?
 
I'm interested in a set

I talked to an auto shop specializing in suspension and alignment repairs today and they quoted me about $700 to install the rear LCA/knuckle bushings

Also, I haven't seen anybody since Gino or Doug selling replacement rear knuckle bushings

PM sent with my info
 

Members online

Back
Top