06 LS - LED Conversion Completed

OK so I know a lot of folks have gone the VLED route and had good results but I am ordering a pair of HIDs from DDMTuning and their LEDs look rather nice for the money. I was just wondering if anyone could offer some expertise on what quantity of which lights I would need to do a full LED conversion from DDM's website. So far I've figured:

Trunk:
http://www.ddmtuning.com/Products/FestoonLED-Hi-Power#tabs

Puddles + glovebox:
Two of these. What types of bulbs do the lights by the kick panels use?
http://www.ddmtuning.com/Products/HP-194-T10-168-LED-Bulb

Any of these lights work for dome+map lights?

Tails:
Two Zr60s in red
http://www.ddmtuning.com/Products/3156-3157LED

Front and back turn signals:
Not sure if any of these will fit. Feedback?

License plate lights and rear reverse not sure.

Any feedback? I've confused myself now @__@
 
Hrm so I'm still a bit unsure as to what will work for the domes/maps and puddles from DDM.

Would this bulb fit all 3?
http://www.ddmtuning.com/Products/30mmFuseLED

edit:Urgh, just realized my setup is totally different from the tutorial I read. I guess first gens have a central dome light whereas 2nd gens have two individual lights in the back for each side of the rear cabin.
 
would these fit for interior leds?

Code:
http://www.v-leds.com/6K-WHITE-3-CHIP-5-LED-p9594388.html#
 
It's been a while since the links were last updated to reflect the changes made to VLEDS' website. This update will cover interior, license plate/tag, reverse, puddle lamp, and trunk lights as of 30-Jul-2013. Quantities shown reflect those listed earlier in the thread. Note that these are all 5k in temp/color.

License Plate/Tag & Interior Light Bulbs (QTY: 5pr.)
Screenshot2013-07-30at94137PM_zps1f09c9f5.png


Reverse Light Bulbs (QTY: 1pr.)
Screenshot2013-07-30at94156PM_zps415e3af6.png


Puddle Lamp Light Bulbs (QTY: 2ea.)
Screenshot2013-07-30at94213PM_zps85772b0e.png


Trunk Light Bulbs (QTY: 1ea. min.)
Screenshot2013-07-30at94228PM_zps932ab2cd.png


In the end, your cart should look something like this.
Screenshot2013-07-30at95228PM_zpsda4efc12.png


Also, the thread below was helpful when I sourced the bulbs.

LEDs For your LINCOLN LS
 
It's been a while since the links were last updated to reflect the changes made to VLEDS' website. This update will cover interior, license plate/tag, reverse, puddle lamp, and trunk lights as of 30-Jul-2013. Quantities shown reflect those listed earlier in the thread. Note that these are all 5k in temp/color.

License Plate/Tag & Interior Light Bulbs (QTY: 5pr.)
Screenshot2013-07-30at94137PM_zps1f09c9f5.png


Reverse Light Bulbs (QTY: 1pr.)
Screenshot2013-07-30at94156PM_zps415e3af6.png


Puddle Lamp Light Bulbs (QTY: 2ea.)
Screenshot2013-07-30at94213PM_zps85772b0e.png


Trunk Light Bulbs (QTY: 1ea. min.)
Screenshot2013-07-30at94228PM_zps932ab2cd.png


In the end, your cart should look something like this.
Screenshot2013-07-30at95228PM_zpsda4efc12.png


Also, the thread below was helpful when I sourced the bulbs.

LEDs For your LINCOLN LS

Thank you......

Now a question. How bright do these make the interior? Daylight bright or "mood" type lighting? I don't want to have the interior so bright at night that I need sunglasses!! :cool:
 
Thank you......

Now a question. How bright do these make the interior? Daylight bright or "mood" type lighting? I don't want to have the interior so bright at night that I need sunglasses!! :cool:

These are the brightest bulbs on the market, I've out fitted my whole car with V-Leds here is a pic of them installed in the interior
IMG_0187.jpgIMG_0172.jpgIMG_1078.jpgIMG_0175.jpgIMG_0174.jpg

IMG_0187.jpg


IMG_0172.jpg


IMG_1078.jpg


IMG_0175.jpg


IMG_0174.jpg
 
Thank you......

Now a question. How bright do these make the interior? Daylight bright or "mood" type lighting? I don't want to have the interior so bright at night that I need sunglasses!! :cool:

Couldn't tell ya, I just ordered them last night. Will take pics when I'm done to add to this thread. Perhaps I'll be able to drive with the interior lights on to avoid tint tickets. :)
 
Update: The bulbs shown below are for the license plate/tag light. The ones listed in my previously posted update says to use the same ones as the interior. Those bulbs are too long and do not fit. Also, shown below are pics of the interior and reverse lights. Notice the difference between the puddle lamp and the interior lights in terms of color and output. They are not blue, they are white, just the cameras settings.

License Plate/Tag Light Bulbs (QTY: 1pr.)

Screenshot2013-08-04at113220PM_zps6cb0e874.png


DSCN0683_zps72f10701.jpg


DSCN0684_zps59a64c3a.jpg
 

Members online

No members online now.
Back
Top