Shredicus
Dedicated LVC Member
So I know there are a lot of topics and inquiries floating around about doing a full LED conversion with VLED.com lights. I heard good things about the quality of DDMtuning HID kits and while browsing them decided why not do the whole deal and go for a whole DDMtuning LED conversion. I just wanted to double check with you fellers and make sure I got all my lights correct before pulling the trigger. Vehicle in question is 2003 LS V8.
Total comes out to 156$ for everything but foggies.
Edit: Also do I need to install resistors for turn signals so they dont flash weird?
- http://www.ddmtuning.com/Products/HP-194-T10-168-LED-Bulb in
1w x5 - Map lights, rear "dome" lights, glovebox - http://www.ddmtuning.com/Products/HP-194-T10-168-LED-Bulb in 2w x4 - Puddles and license plate lights
- http://www.ddmtuning.com/Products/HP-194-T10-168-LED-Bulb in 2.5w x2 -kick panel lights
- http://www.ddmtuning.com/Products/HP-194-T10-168-LED-Bulb in 3w x2 - Reverse Lights
- http://www.ddmtuning.com/Products/FestoonLED-Hi-Power x1 - Trunk Light
- http://www.ddmtuning.com/Products/3156-3157LED in HP18 Amber x2 Rear turn signals
- http://www.ddmtuning.com/Products/3156-3157LED in CX21 Amber x2 Front turn signals ***Note: if someone could confirm whether or not these switchback bulbs ill fit in the housing as I'd prefer these. I had heard there was some clearance issues?***
- It looks the the tail lights bulbs I was originally looking at earlier sold out or something. May just go for HP18s in red for these.
- http://www.ddmtuning.com/Products/DDM-HID-Kit-Slim-Ballast-35W-or-55W in 35w 6000k
- Foggies are still undecided. May spring for Hoen colormatch. I was thinking about upgrading to an LSE bumper eventually and would like to be able to transfer these to the new housing. The standard fogs and LSE fogs use the same bulbs right? I am fairly certain they do according to lighting charts. May just grab a pair of these in the meantime. http://www.ddmtuning.com/Products/LED-Fog-Light in H10
Total comes out to 156$ for everything but foggies.
Edit: Also do I need to install resistors for turn signals so they dont flash weird?