Moar Pic whoring!
Well, I was supposed to go play paintball at a field that is like an hour from my house. I was super excited because this will be the last time I will get to go there, since I am moving out of NC next weekend. I got there, and nobody showed up, slow weekend I guess. So I was bummed and didn't know what to do with myself. So, I decided to go work on Jamie's turd...
Put it on the lift and was dissapointed to see the insides of the front tires so chewed up, from outside, the tires looked good...
Heres a shot of the rears, pretty good tread...
I had this stack of tires laying around that I had considered putting on my car, just to see how they looked, they are used, obviously... 245/50R16s
I always like to clean the wheels so here is before and after...
Stuck them in the 'cuda machine, its basically a hot water parts washer...
While I was working on this an old friend of mine showed up with his new toy, he built this himself. Its a 5.4 4valve out of a Navigator with a Australian Ford Falcon intake manifold. I drove it, its SICK!
Anyway, this is the rims after cleaning and spray waxing...
Mount and balance 4 tires. I don't normally put weights on the outside of a nice lincoln rim, but the tires are old and its a long drive to FL... that and our tire machine is abused and you can't switch it from dynamic to static anymore.
Pulled the front bumper off in anticipation for the new compressor...
My goofy buddy Shawn giving his approval.
The center caps didn't do so well, I left them in the trunk for Jamie to play with...
And lastly an Oil change with a Motorcraft 820 and 6 quarts of Motorcraft Synthetic Blend 5w30
Thats all for now!