Will this fit

[keatonsdad]

Http://wichita.craigslist.org/pts/2391584350.html


Looking to Bo some add ons and this a supercharger is one of them. Will this setup work and is it a good price?

 

[NoLimit95]

Isn't that the same one or close to the same that Laser put in the white car?

 

[keatonsdad]

Not sure I'm hoping he will chime in here soon if it is I'm going to pull the trigger and get it

 

[NoLimit95]

Not sure I'm hoping he will chime in here soon if it is I'm going to pull the trigger and get it

I had his number but lost it. I'm sure he'll get on here and speak up before it sells. It looks pretty much the same but I wouldn't wanna say for sure. That's one part of the engine that I prefer not to mess with anymore since I blew up the 94 and garage.

 

[Marcus]

Unless you've got C heads, not going to fit.

 

[marked8]

It will not work, and even if you had C heads a lot is missing.

 

[keatonsdad]

Thanks guys I appreciate the fast response. Saved me a headache.
How about this setup.

http://wichita.craigslist.org/pts/2393283633.html

 

[Raped Ape]

Looks to me the only thing usable in that listing is the M112 only, everything else I am reading is milled or bought for adaptation for the V6 application he was intenting to do. The lower intake is for the V6, so what I read the M112 is only thing you could use, and the injectors, if there is 8 of them instead of 6.

 

[LSC HUNTER]

If you want to go with a Cobra Swap then go to SVT Performance and look there. Always guys selling that stuff complete. I have also seen the KB set up like Laser there as well as on EBAY for the 2K price range.

http://cgi.ebay.com/ebaymotors/Kenn...ptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

 

[LaserSVT]

If you want positive displacement on a B head car then the ONLY company that made one is KB. They made a 1.5 a 1.7 a 2.1 and a 2.2 size blower. The 2.1 is the most effecient and the 2.2 will make the most power. I would not touch a 1.5 or 1.7 as they will only be heat pumps.

 

[LSC HUNTER]

Here is an Eaton swap complete and it looks to be really all there except for heads of course.

http://www.moddedmustangs.com/forums/poweradder-parts/215310-complete-eaton-swap-mach-1-cobras.html

 

[BAD97LSC]

i wish that had come up when i had my tax refund i would drive there and get it, dam it!