GMAN
Dedicated LVC Member
Myco came by today, and I fixed him up with a few parts for his Mark, and to cut the wire to get rid of the Check Air Ride message. That paint job is looking good.
Myco Came By
- Thread starter GMAN
- Start date
NoLimit95
Dedicated LVC Member
GMAN, did you let him leave there with those rims on backwards? 
Both cars look good and yes, the paint does look good now that I see it out in the daylight.
Both cars look good and yes, the paint does look good now that I see it out in the daylight.
GMAN
Dedicated LVC Member
Yes, unfortunately he has directional tires, and the tires are mounted on the wrong wheels. I told him he needs to go back to a tire shop, so it may be a bit. He still has to remove the dash and and reconnect the yellow vac line to get the AC to blow correctly.
unfortunately he has directional tires, and the tires are mounted on the wrong wheels. I told him he needs to go back to a tire shop, so it may be a bit. He still has to remove the dash and and reconnect the yellow vac line to get the AC to blow correctly.
Duck
Well-Known LVC Member
Been there done that!! Tell him to zip tie the hose to the wire bundle next to it, to keep it from coming off again.
Jeffintampa
Dedicated LVC Member
boy I tell you 2 gen 1s setting there like that would look better lol
BAD97LSC
Dedicated LVC Member
being an owner of both gen's i dont understand why you gen 1 people think gen 1's have far superior looks over a gen 2. i think gen 1's look 25 years old!
marco
Well-Known LVC Member
I like both styles, but would love to find a nice 98 lsc to replace my 94.
Opinions and ass holes. I like the Gen 1 just fine but like the gen two more. The Gen1 has a more agressive look on the nose but the tail and nose make the car look dated. It looks like a 20 year old car. The Second Gens look like they were made this century and people mistake my beater for a new car all the time.
GMAN
Dedicated LVC Member
Me too. Most people cant believe that my car is a 98.
Moes8
Dedicated LVC Member
LOL
97% of the car is the same and you think it looks "FAR SUPERIOR" ??
LMAO
ps, i like the look of a gen 2 better myself, but only just
.
Been there done that!! Tell him to zip tie the hose to the wire bundle next to it, to keep it from coming off again.
Right now I'm preparing to take the dash out. What exactly am I looking at here? Don't see the yellow vacuum tube.
Also, afterward going to run back out to Gman's for that rim sometime this week and have the tires re-mounted. Before I do that though I am going by autozone and finding the bad rim. I know it's one on the front but not sure if it's the left or right.
Also, after changing the plugs and swapping out the COP's w/ 2 extra I have ( from a junk yard car ) I still have a stumble so I'm looking for new O2 sensors. Going to need to call max about that.
ho-hum
edit: ohh and also figured out my ballast is bad and need to get a glitch (sp?).
chicken
SHEOOOOOOOOT
cannot believe how easy air tools make this! Anyway,
1.One bolt on each side at bottom near door.
2. 2 bolts in L bracket at driver's right knee.
3. two bolts deep in front of shifter.
4. 6 bolts holding steering column up.
5. 6 bolts across top of dash
Do I need to pull anything else from the dash?
1.One bolt on each side at bottom near door.
2. 2 bolts in L bracket at driver's right knee.
3. two bolts deep in front of shifter.
4. 6 bolts holding steering column up.
5. 6 bolts across top of dash
Do I need to pull anything else from the dash?
Lownslowlsc
Dedicated LVC Member
i'd say alittle more then 97%..int is more refined as is the front and rear end, side mirrors, neon, hids ect.