My 1st Gen LS Project "thre3N9NE" (due, August 2013) + PICTURES!

Rollin - here you go.


got rid of the window trim today, took a few shots..

but first, heres a picture of the rims cleaned up.

KEEP THE FEEDBACK COMING!

1F4F6A4D-DD37-4B8B-BB5C-B87CCDA458B5-9688-000004982E2E3693.jpg





BEFORE



A993E02B-A451-47AF-AFDE-FC3202E4B4ED-9688-000004984C79F9BF.jpg




AFTER


62DD9F14-7DBB-4CA6-BAEA-5269AB57268C-9688-0000049853AEB5D1.jpg


880D5AC9-B59A-431C-81BB-8B449FA77B11-9688-00000498443881A8.jpg
 
It' coming along nicely. The wheels look good too, just needs to be lowered and it will be money.
 
Alax7 said:
It' coming along nicely. The wheels look good too, just needs to be lowered and it will be money.
Click to expand...

alax, i know its prolly posted half a million places here, but can you point me in the right direction as far as what i'd need, where to get it, how much it is, and overall info? just in a summary. I hope id have enough room......
 
lincolnlogs said:
alax, i know its prolly posted half a million places here, but can you point me in the right direction as far as what i'd need, where to get it, how much it is, and overall info? just in a summary. I hope id have enough room......
Click to expand...

Eibach Springs Pro Kit and an alignment. Some members bought and used the camber kit. Additional $70. I just had an alignment done. $75 at the shop. Worth the $5 to get it done professionally and not deal with the aggrevation. Just my $.02.

Eibach Spring Pro Kit Prices Vary:
Summit $309
Ebay $220-$320
TunerDepot.com $320
CarID $314
SparktecMotorsports $243
ProTuningLab $264.50
AndyMotorsports $280.73
SuspensionConnection $269.78
AutoAnything $276.95
 
RollinLS said:
Here you go.:)
Click to expand...

Cool, thanks Rollin, why did I miss that ?

thanks again. looks real good how that goes on.



- - - - EDIT:

Was there a particular size in width that worked best for you guys,
I guess I could go out to my LS and measure. looking to do the bottom ledges as well.
 
Car looks real clean and simple. The rims to me are just the right touch with the design of them. I'm looking at doing my window trim as well but I got to figure out wile the front ones won't stay down. Ever since I got it back from the paint shop they won't stay down. Don't know how they are held together on the car and weather or not the shop forgot to put something on. Also what did you use to do your trim and did you do it on the car?
 
teforne said:
I get encouraged to get off my hindpart and get to work on my LS with each progress post you make logs, the car looks downright sexy
Click to expand...

thanks a lot teforne!
thanks everyone for the positive feedback.

only things i have left on my list are: paint valences, and side skirts factory match. and small things like customized license plate, tinted license plate cover, finish my intake up, maybe paint a few parts under the hood, and install a double din.

going to be a little pause now, because im replacing all my plastic lines and degas bottle.

ill post back when i have some progress!

OH and BIGRIG, im going to do your factory match on the engine bay brace idea while i have it off for the degas bottle.

:rolleyes::D
 
LeaSr77 said:
Car looks real clean and simple. The rims to me are just the right touch with the design of them. I'm looking at doing my window trim as well but I got to figure out wile the front ones won't stay down. Ever since I got it back from the paint shop they won't stay down. Don't know how they are held together on the car and weather or not the shop forgot to put something on. Also what did you use to do your trim and did you do it on the car?
Click to expand...

i had the same problem with my window trim coming up. its held in place by a tacky puddy kind of thing. it just looses its stick once you take it off. a dab of silicone around the clip and some tape to hold it down overnight worked for me

i got the vinyl link from Rollin, its posted above. stuff matched perfect, and its matte black. somepeople used plasti dip, which would work the same.i couldnt find it anywhere.

cheers!
 
well, not much to update. how you see it here will be how it is for the LVC meet. the LS met it match this weekend with the 7'' buffing wheel.

hows she look? a little cleaning under the hood too.

A75EB1C0-86C1-4D7F-BE70-7B96B2EE019C-65404-00001962F374F368.jpg

083115CF-C191-4788-BF9C-34A6CF3049A8-65404-000019631402D4F3.jpg

B2B9E9F0-093D-4D72-B8FF-3C3A0BCA709A-65404-00001963011CEBF7.jpg

CB5B9BCA-9A60-4F83-9804-4CF86C36BAFC-65404-00001962E6940C72.jpg

A75EB1C0-86C1-4D7F-BE70-7B96B2EE019C-65404-00001962F374F368.jpg


B2B9E9F0-093D-4D72-B8FF-3C3A0BCA709A-65404-00001963011CEBF7.jpg


083115CF-C191-4788-BF9C-34A6CF3049A8-65404-000019631402D4F3.jpg


CB5B9BCA-9A60-4F83-9804-4CF86C36BAFC-65404-00001962E6940C72.jpg
 
lincolnlogs said:
.... OH and BIGRIG, im going to do your factory match on the engine bay brace idea while i have it off for the degas bottle.

:rolleyes::D
Click to expand...


oh Crap, I totally missed this, did you get it done ? Mine stands out pretty nice with the silver and all. BigRig ideas can be cool too!


Logs, you do amazing work and don't seem to F around, if only I could finish a third of what you've accomplished. Real nice man, Kudos!
Now when did you say you wanted to start working on mine ? lol
 
So much red. I think just the dash trim and door trim would be a perfect amount IMO.
 
Looking good bro. Looking forward to seeing it next week.
 
Meanwhile yours is in a million pieces Rollin, are you going to be able to have it all together for the Meet on June 7th ?
 
IMG_1630.jpg


Here's whats new. Havent been on in a while. Tinted the headlights (lenses were toasted with small stress cracks and sun spots that i spent 3 hours trying to remove.

and added some LED angel eyes.


oh and this sticker for my back window...

IMG_1258.jpg

IMG_1630.jpg


IMG_1258.jpg
 
You must log in or register to reply here.

Members online

No members online now.
Total: 77 (members: 0, guests: 77)
Back
Top