If you want LED lights or HIDs

One for the interior, only one needed in parallel with any one interior bulb. One in parallel for each puddle light, not sure about the license plate lights.
 
Bump for last minute people!


I ordered the LED fog bulbs again, and got another HID kit for the gf.

Thanks a lot.... just dropped about $400 on myself 2 weeks before Christmas :eek::shifty:


(at least I know I'll get something I really want!) lol
 
As long as it wont drain the battery i wont care about them staying dim.

Im sure it wont because the amount they use is very minimal and the car cuts off all power after a few mins anyways.
 
Pretty sure you still need them. One resistor is to simulate the load of the filament bulb to get rid of the bulb out message. The second resistor is so the the LED bulbs works at 2 brightness levels so when you use the brake at night or with the running lights, the brakes will go from dim to fully bright like they are suppose to. Without the resistor to dim the led bulbs, the led bulb will be at maximum brightness with the running light or low beams on, without pressing the brakes, so when you actually press the brake, the brightness doesn't change because its already at it's maximum.

If you dont want to warm the cars behind you that you're braking, you dont need the resistors.
 
Mine turn completely off, Alax. Must be the high power LEDs I got.
 
Got some of mine today. I ordered puddle and license plates lights but they are on back order :(

IMG_7419.jpg
 
Im missing those two as well havent installed the reverse lights yet. You like them??
 
Im missing those two as well havent installed the reverse lights yet. You like them??

I have the front turn signals and reverse lights in right now. I'll be putting in the tail lights tonight. I like the turn signals, nice and bright, but the reverse lights are supposed to be 6000k but they have a little tinge of purple in them :confused:

Did you order turn signals? If so what ones?
 
purple??

Hmm...i ordered 5K reverse lights. No turn signals.
 
Has anybody replaced the vanity mirror bulbs?

and what about the trunk bulb??
 
I haven't seen anybody replace the vanity lights. Has to be more trouble then its worth.

I did do my trunk light though. Bulb is a 212-2
 
Cool.

I wonder why they decided to put a single one on the right side instead of one on each side or one larger one under the package tray.
 

Members online

No members online now.
Back
Top