How bad would a G35 Walk a Mark??

htrdlincoln98 said:
If you can hold the car over 2k then thats a high stall stock converter. It may seem low but brake stall is normally much lower than the advertised stal speed. Thats nice to get stock in a lincoln.
Click to expand...

I'll put it a different way. It'll try to push the car forward much lower rpm than low 2k. Its just that around that point is where it'll push throu the brakes or break them loose.

Keep in mind the LS sits heavy on the rears with nearly 50/50 weight distribution, it doesn't spin them easy.

Sure feels like a typical stock stall to me.
 
98LSC32V said:
The IS350 is crazy fast... saw one at the track with only a cold air intake and catback running 13.5 at 100mph on stock tires.
Click to expand...

I don't doubt they are fast, but you unleash the lincoln at highway speeds, and its like a dog with its ass on fire. I've dogged audi's and other foreign :q:q:q:qboxes on the highway like they were towing an anchor
 
You have to remember, at high speeds, aerodynamics are VERY important. Not so much power to weight ratio, which dominates from 0-60.

I just love when i pull up to an import that i know is 1-2 seconds faster in the 1/4 then me, and i say to myself "if i dropped 2 grand on this Mark, i'd blow his doors off".

One day, i will....and i'll be smiling ear to ear baby!!!
 
98LSC32V said:
Try racing ... Bmw 335i and you will be buslengths behind. You would be surprised which cars pull hard on the top end...
Click to expand...

Yep, I can attest to that. I got trashed by a chipped 335i. I'm not used to getting pwned on the highway, but then again, his $40,000 car beat my $2,000 car so I don't mind.
 
PetesSweets86 said:
Mitsubishi is American you F*cktard!
Click to expand...
Mitsubishi Motors Corporation (三菱自動車工業株式会社 ,Mitsubishi Jidōsha Kōgyō Kabushiki Gaisha?) is the fifth largest automaker in Japan and the fifteenth largest in the world by global unit sales.[2]


I'm gonna have to agree with XLR on this one.....mitsu is about as american as Admiral Yamamoto
 
And mitsubishi used chrysler parts. I was amazed at how many chrysler symbols are in my gf's eclipse. you would swear it was made here!
 
yes xlrviii is correct the zero was made by mitsubishi. they might have a plant in the us dunno, dont care, all crap.

and as far as mixed up cars, how about a mercury villager........its a nissan quest, that uses a chrysler, eng made from mitzu parts (god i cry when they come into work)
 
chickenviii said:
yes xlrviii is correct the zero was made by mitsubishi. they might have a plant in the us dunno, dont care, all crap.

and as far as mixed up cars, how about a mercury villager........its a nissan quest, that uses a chrysler, eng made from mitzu parts (god i cry when they come into work)
Click to expand...

LOL YUK!!!!

I cry just reading that.
 
Name Mitsubishi Motors Corporation

Established April 22, 1970

Head office 33-8, Shiba 5-chome, Minato-ku, Tokyo 108-8410 Japan

Number of employees Consolidated 33,202 ; Non-consolidated 12,761

Capitalization JPY 657,349 million

Any other ?s;)
 
It's actually funny this thread is going on. I ran into a G35 coupe this morning(guessing 05-06 model). Speed limit was 50mph, so I didn't go much above that, 60mph. Anyways, at 60mph, he only had 1/2 a car on me. I was really happy and impressed w/ the Mark.

Anyways, just thought I'd share since there was already a related thread.
 
panthermike said:
It's actually funny this thread is going on. I ran into a G35 coupe this morning(guessing 05-06 model). Speed limit was 50mph, so I didn't go much above that, 60mph. Anyways, at 60mph, he only had 1/2 a car on me. I was really happy and impressed w/ the Mark.

Anyways, just thought I'd share since there was already a related thread.
Click to expand...

"Ask any racer, any real racer, it doesn't matter if you win by an inch or a mile." Haha just messing around, good run...
 
You must log in or register to reply here.

Members online

No members online now.
Total: 735 (members: 0, guests: 735)
Back
Top