Baer Big Brake Kit

[GMAN]

I came across this Baer brake kit today. Will this work for the Mark? The guy wants $700 obo. What a good obo offer?

 

[Raped Ape]

What did it come off of? And what kind of shape are the rotors in?

 

[Right on the Mark]

How big are those rotors? Those calipers only look like 2 piston. You can buy the same cobra(2 piston) ones new for 200. The rotors you could buy new brembos for prob 100 each. So all new would be 400. Thats front stuff. Just saw your pics that it comes with rears too.

 

[Raped Ape]

This is the kit it looks as if you are looking for off a 1994-2004 Mustang Baer Track Claw Brake System and the price he is asking is too high for used if this is it,

http://www.autopartsdealer.com/baer...edium=cse&utm_campaign=cp50&utm_content=rank1

 

[GMAN]

I haven't seen them personally. Just came across them. I know they are for a Mustang.

 

[wickedwhiteVIII]

What you really want Gman is M-2300-X brembos $1200.......well that's what I want next I already have cobra brakes and they're great but. The brembos are better and I can't afford 6 pistons but 4 pistons is enough imho!

 

[Raped Ape]

Well new they are going for less than $900.00, so being used and depending on condition of rotors caliper pistons, I would say $400.00 at best.

 

[SATURN5]

Stupid money for what's basically Cobra spec brakes.

 

[LaserSVT]

Guys, thats a front AND rear brake kit.

As was pointed out its the same thing all 94-04 Cobras came with front and rear. The stopping they provide over the chit stock brakes is well worth it.

As for me, I wouldnt go beyond $500 for that kit.


EDIT: I also see braided front lines and those are $100 by themselves.

 

[Frogman]

Braided brake lines are so... old school. Cross Drilled brake lines is where it's at, nowadays.

 

[BAD97LSC]

:lol:

cross drilled brake lines

 

[94m5]

Yes they will work. (fronts anyway)


I have the SAME setup on my 95.

Mike

 

[lsc8]

the kit i bought used also came with ss brake lines, but the thread size is different on the mark. I didn't use mine, but I would think you could prob get an adapter to make them work. The last set of 2 piston Bear brakes like that i powder coated was stamped pbr on top with the exact same part number as my cobra brakes. The only thing you will use from the rear brake setup is the rotors. If the rears are no better than the looks of the front I wouldn't mess with it. Find a set of front calipers and brackets then buy matching cobra rotors.

 

[Scorpio1118_2000]

Give him an offer of $400 and if he says no, walk away there are better deals online for new stuff.

 

[GMAN]

Asked, and declined. Oh well.

 

[94m5]

I found my Baer setup at a mustang salvage yard for 50 bucks. Extreme case I know, but the thought remains the same. Look for a speciality mustang yard, and check with them.


Mike