Search results for query: *

Hello, What is a good, compatible code reader to use for a 2001 Lincoln Continental Premier Edition? And one that can be used with the engine off, Thanks.

Hello, a stupid question, I'm wanting to know how to do a primary resistance check on our coils and the specs for both the primary and secondary. Mine is 2001. I noticed when I checked the injectors, one prong showed a + positive. I didn't see this on the coils. Just wanting to know where to put...

Looking for two Moog K8310 ball joints Must say "problem solver" on them, Thanks

I'm wanting to rebuild the front end using "problem solver" Moog parts. So far I found the bottom one: K8259 and the top K8310: @ $104 but the top one doesn't say problem solver and actually looks identical to the rare parts brand rp10237 @ $58 advanceautoparts.com I don't think its a Moog...

Hello, a recap: I had lost the original keys for the '01, failed to drill out the ignition lock cylinder and had to replace the column that came with 2keys. In talking to one locksmith, he asks me if I have the original column he says he can save me some money by using the transceiver off of it...

Hello, I've been working on a 2001 that been sitting for many years. I recently removed the oil sender, installed a T with a oil pressure tester and a barb fitting and pumped in oil, but when the gauge didn't move, I thought nothing happened and was prepared to remove the filter, and pump oil...

Hello, the keys for the '01 Continental were lost, to make a long story short, I had to replace the column and with it came w/2 keys and a fob. In order to get them programmed, is there anything else I need?

Hello, As everybody knows by now, I been working on a 2001, sitting for years.... trying to get it ready to start. I messed up when I drained the oil and filter. I put oil in the filter and put a quart or 2 in. I took the oil sender off and put a barbed fitting on with a clear plastic tubing and...

The '01 I've been working on has 42,000 original miles, but has been sitting for years. I'm close to trying to get it started. If I get it running, and on a tow dolly, will the rear wheel bearing hubs hold up to 100-200 mile trip. Thanks in advance.

I've been working on 2001 Conti Premier Edition 42,000 miles, only thing is it's been sitting for years in a garage, but it looks great inside and out. Had replaced fuel pump and filter. I didn't have a key, tried drilling out the lock, swapped in another column with keys that will have to be...

I am trying to swap steering wheels on my '01. After taking the airbag off, I see there are no holes to mount puller bolts. There doesn't seem to be any places for a regular jawed puller to grab the wheel because they are too big. The thin jawed pullers look weak. What can be used? Thanks in...

Hello, I'm replacing the steering column in my 2001. All three terminals grouped together are connected and the shift lock terminal is connected. There is one three wire terminal that I can't find where it goes to, I started project a couple of months ago and I can't remember, the car is out of...

I need to move a non-running 2001 Continental. Can't work on it at it's present location. The transmission shifts into neutral. It's going have to be pulled on to a flatbed tow truck from the rear. I'm guessing this won't be a problem. No damage to the transmission? Most of the time I see cars...

Hello, My '89 Town Car is going to have it's AOD tranny rebuilt.The direct drive clutch is bad. It will have the upgrades and a reman'd torque converter. I'm thinking the rear main seal should be replaced, but who makes the best one now a days? Rubber or teflon? Fluoroelastomer? I talked to a...

I own a '89 Town Car Signature Series and a 2001 Continental Premier Edition. I am glad to be here!