Search results for query: *

Ok was driving to work doing about 40, when I started hearing noises from my engine, I pulled over and turned the car off. I got out, saw oil all over the ground. I tried putting more oil in to find the leak, oil poured right out just as fast as I poured it in! Got the car towed home. Researched...

Hey quick question. My t50 fork bit I got from autozone failed. Meaning the tips twisted. I have the black ones. Is there a better brand or material type to buy? I got one bolt off on my driver side rear hub, but I need to get the front lower bolt off and its not turning.

Well this spring/ summer I will be in the market for another car. Was thinking of looking below the rust belt for a blue or one who just needs a paint job Lsc Gen 2 for around 2-3k. But then I was thinking about a maruader or even a used Dodge charger rt. I want a car that has v-8 power and...

Hey I have a question. I'm trying to remove my driver side rear axle nut since my hub bearing failed I wanted to go and grab a complete hub assembly from the jy. My issue is I had put locktite on the threads about a week before and now I need to remove the bolt and I can't. I tried heating the...

Ok so I'm trying to get my 97 base up to par. Had purchase and installed new lower control arms, new inner tie rods, new radiator, new water pump and thermostat, new complete sunroof on the way. Also had been bless to be offered a new new rocker panel for free. Things was looking good. I...

I was wondering is there a plan to offer the Saleen speed stars in a deep dish version in the 18x10? I included some pics of what I'm talking about. I think a lipped 18x10 would be perfect.

My driver side lower rear rocker panel (just before rear tire) is rusted. I wanted to know if any of you body guys have a lower rear rocker panel already cut out. I want have mine cut out and then weld the new piece into place. Hit me up via text and I can discuss this in more detail...

Ok I'm about to get my mark viii repainted whenever the new bumper from temple is available and I'm definitely want to leave it blue. But I'm really thinking about going with fords kona blue (L6). Anybody think it wont look good?

Are Gen 1 and Gen 2 sunroofs assemblies interchangeable? I need a new complete assembly and wanted to know if I can use any year or am I stuck with only assemblies from 97/98's?

Hey since in a week or so I will be doing my front shocks, I was researching my options. The normal airbags vs coil issues. I then came across a kit that is available at advance auto and other places, Monroe 90002. Never heard of this kit before and I can't find any reviews on this even on this...

Ok I completed the blend door install. Before I put the dash back together again, I turned on the hyacinth and watched the motor and arm move. Put the dash together and now the unit works....except now instead of freezing cold air blowing when I select heat, I have cool/ Luke warm heat. Could it...

I have a questions, does anyone know of a rotor that is the same size as the factory rotors front and rear of a gen 2. I asked because I want to pick up some front hubs from a cobra and put them on and use the factory brakes and I found a shop here that can press new hubs and bearings in the...

hey i got the lsc molding's from micah. whats the best adhesive to use to install them?

ok here is a question i wanted to ask. yes i searched first but no answer. I see a lot people are saying to get the focus fuel pump, but at the prices for that pump i could get a LMS pump from geno for a few bucks over a $100. and that is a high performance fuel pump. so is the focus pump that...

hey has anyone seen the 2010 taurus sho 20" rims? i like them alot. does anyone know if the new taurus retained the same bolt pattern, cause i def want a set of those rims for my gen II mark.

ok here is my problem. Whenever I close my driver side door, i hear a loud rattle. Now this only happens when my window is at least 3/4 way open to being full open. I have pulled the door panels off and felt the bottom of the windowm mechanism is able to swing. so i figure this is what is...

Hey is it me or is that new lincoln MKS Generation Keypad, which uses heat-sensing technology to bring alive the keypad of LED backlit numerals embedded in the driver side B-pillar nice. I wonder if there is a way to add that to my Mark VIII piller. Is there anyone here who has been to the SEMA...

Yesterday i noticed that when i have my car at idle and if i hit the gas a lil bit to hear the growl, i use fuel very quickly. with my mpg at only 15.6 mpg on the highway with me cruising at 70-75, i must need a new fuel filter. so I just wanted to know the best brand of fuel filter to get or...

hey does anyone here have the 2 canisters that are in the tray under the rear of a Gen II. I believe it is part of the evap system. I'm looking for a new pair or decent used (please be cheap :p ) ones as my tray completely rotted away and my canisters are damaged very badly.

I have a 97 base and i'm only getting 13.4 mpg. I was wondering what is everybody else gas mileage is for gen II marks. (I do have a exhuast leak which i'm planning to get the LMS kit from geno when he gets more oval single tip mufflers in.) I think i might need a tune up, so new plugs are in...