I am planning on going with the E303 cam from ford racing, I have been told that I should not have any problems - do you know specific details about this cam? I looked into converting to MAF but seems to be a "bear" so I rather avoid it if I can.
thanks for the input, I looked on ebay but as you said, chances are slim, I also googeled as well not wit much results, just is not a very popular car it seems. I came up with my own "german engeneering" to fix he problem, will just take a trip to home depot ... :D ...
My car will spend the...
I need to replace the weather striping on both doors ... after 19 years they decided to leak water, can somebody point me to vendor were I could purchase them ??? or is a parts car / junk yard my only option ???
thanks in advance
here we go again ... lol ... basicly it all depends were you want to be - simple bolt ons would be an air intake, open up the exhaust to a full 2.5" system and I'd change gears to 3.53. If that is not enough I would go the superchared route, you can stay at the current speed density system with...
WELCOME ! ... i had the same problem with the speedo, easy to fix though if you have a gps or someone else who can drive in a car. i just took my gps with me while driving and the plastic cover from the cluster de installed. Then I just adjusted the speedo needle were it needed to be - DONE...
as far as replacing stock parts, I dont know of any special web site. Either the junk jard or ebay is your best friend. Concerning aftermarket parts, lots of Mustang 5.0 parts will fit depending on what you have in mind.
I went through a fiasco at the local Best Buy store for the installation of an aftermarket radio. They basicly came to realize afterwards that my 87' had the prenium option (dah, not that the radio says it on the front) and told me that had to rewire my car because of the factory amp installed...
that seems about right, given the weight. You also might want to check if the BB in 89 had the 225hp option. From what I understand they all said HO on the engine.
I believe the swap was made in 1990. I have an 87' and got the cluster of an 91' 120 speedo. but I have to say that I swapped back for 2 reasons. First after getting used to the factory 85mph, the numbers on the 120 were way to small for me and hard to read, second I bought the white overlay as...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.