raising a air suspension?

markdtskitted

markdtskitted

Active LVC Member
Joined
Oct 13, 2011
Messages
103
Reaction score
1
Location
detroit
:confused: is there any way to raise your factory air suspension? i seen a way you can lower it but i was wondering was there any way you can raise the factory air suspension higher than the normal ride height on a 97 mark:confused:
 
jus wondering, im tryin to learn every thing about these cars & i seen a thread on lowering the factory air suspension & was jus wondering could it be raised also
 
the ball joint prevents bigger rims. 20's is as high as id go. heard someone had 22s with a tire wall like 1/4 thick.
 
If you want to lift your car take some 2X4's cut them to length of the gap between the upper and lower controll arm with the suspension at hight ( take a jack and raise the car as high as it will go). Stick the 2X4's between the upper and lower controll arms. BAM! You have a raised mark.
 
Adjust the sensors. However, that'll only get you an additional 1/2". If you need more height for 26" or larger DUB wheels, you might want to consider installing straight axles.
 
This is within the sensors range.

I would not recommend doing this, and I would definitely recommend that you never drive it like this. Lots of stress on the bags and suspension in general.

dnehthend-truckup1.jpg
 
The car looks nice lifted. It kind of gives the car the muscle car look.
 
You should do that ed. Been thinking about doing it too. I also haul stuff with my mark and I think it would pull better that way.
 
You must log in or register to reply here.

Staff online

Members online

Total: 264 (members: 1, guests: 263)
Back
Top