Lownslowlsc
Dedicated LVC Member
changing the plugs on the mark and was wondering what type they put in, oem. The plugs i got out is a champion rs14yc6. Randomly gapped between .53-.60.
Also, The torque wrench i have is a half inch and i dont have a 1/2" deepsocket that will fit the plug. I used a 12" and socket ext and put them in "hand tight". Then tightned them till they were snug. Not moving in, not moving out with alittle force.
Am i ok, i'm scared :q:q:q:qless with the aluminum heads on both this and my marquis.
I'd have to say though, this is probably the easiest car to do plugs on minus my first car, a cavalier 4 cyl..lol..
Also, The torque wrench i have is a half inch and i dont have a 1/2" deepsocket that will fit the plug. I used a 12" and socket ext and put them in "hand tight". Then tightned them till they were snug. Not moving in, not moving out with alittle force.
Am i ok, i'm scared :q:q:q:qless with the aluminum heads on both this and my marquis.
I'd have to say though, this is probably the easiest car to do plugs on minus my first car, a cavalier 4 cyl..lol..