Temple perf gauge install

[MarkVIIIS]

K I need a little help I've never screwed with the gauge on anything I just installed the white gauge drone temple performance and I obviously did installed the needles correctly cause the only one that works is my fuel gauge I just intalled all of them at 0 which I kind of thought wasn't gonna work someone please help me

 

[driller]

I think you're supposed to mark where the needles rest at before removing them and replace them in the same position?

 

[98lincmk7lsc]

You need to do what the included instructions told you to do. It's been a while since I looked at them, but this should get you there...

You should have noted the RPM you're at for a certain speed beforehand.

Once the white gauge face is in place, before putting the clear cover back on, you put the speedo cluster in the car and use a GPS unit or something to get back to that speed mentioned earlier. Now, you can put the speedo and tach needles where they need to go. (Obviously, you need to exercise extreme caution when you do this, since you'll be driving at the same time.)

With that completed, you can go home and put everything back together

 

[MarkVIIIS]

I used my sct liveries to get everything as close ad I could so I'm good thanks

 

[Don Pfau]

I see your staying busy with it. How is it running for you these days. If I remember right you had a oil pan leak and something else ??

 

[MarkVIIIS]

It's actually running really good check engine light went out I replaced the pan last year I've been alittle lazy this year haven't installed the cobra intake or got it tuned for the methanol yet I'll probably take care of that stuff this winter then I'm gonna get it painted in the spring but lately I've been working on the interior

 

[MarkVIIIS]

Here's a pic to compare LEDs and regular bulbs in the gauges

 

[MarkVIIIS]

I think it looks pretty good but u cant really see the red with the blue bulbs