DFlaJax
Active LVC Member
Has anyone had issues with rear alignment after replacing knuckle or UCA bushings? Not there yet, but looks like it could be a problem. Can any tire & wheel shop do it, or is it best done by stealership?
Rear alignment
- Thread starter DFlaJax
- Start date
New bushings will change alignment settings. I would like to say any shop could do it but I have had three places insist I had no rear camber adjustment. They didnt know about the offset bushing in the UCA mount.
Just point out to them it is adjustable and any shop with a Hunter setup to do four wheel alignments is fine.
Just point out to them it is adjustable and any shop with a Hunter setup to do four wheel alignments is fine.
chris2523
93 Mark VIII
i was told that there is no alignment in the rear too. but it didn't matter because the rear alignment was perfect after a replaced bushing.
huh. i'll have to talk to the shop about that.
huh. i'll have to talk to the shop about that.
HANG THE EXPENSE
Well-Known LVC Member
rear alignmint
Sure are alot of pertenant post tonight.I have to get this done as well.Thanks for the info.
Sure are alot of pertenant post tonight.I have to get this done as well.Thanks for the info.