Ordered my first mods last night
- Thread starter Screw-Rice
- Start date
ford nut
Local nut case
So you are saying I undercharged ya
Yep!!!! SHHH!!! don't tell anyone.
ford nut
Local nut case
Sure it is.
But a 93 shaft works fine.
I don't think I will see a difference on my car the way I drive it.
I would put my mod money somewhere else, not on a aftermarket shaft when I can find one in the bone yard that is up to the task.
kustomizingkid
Dedicated LVC Member
The 93 with 4.10's isn't vibrating at all right now... why spend more money...
ford nut
Local nut case
No not at 100 mph +
80 to 90 yes.
100 + here is close to a DUI.
You get poped one time it's 6 months no license.
Do you drive 100+ to justify the cost?
OBTW I did go over 100 MPH and it didn't vibrate on me.
Works great.
It don't take long to get to a 100 with the 4.10s
:gr_devil:Screw-Rice
Dedicated LVC Member
+1 on the 93 one piece holding up. I ran consistently at 80+ on a regular basis and had no vibration issues at all. Oh and
Well then I may just save $400 and get the 93. I do spend 60 miles each day doing 80-85 and sometimes I have to hit 100 on the short passing areas. I wont do it but one time but I also want it to be vibration free when I see what its top speed is.
Screw-Rice
Dedicated LVC Member
Well then I may just save $400 and get the 93. I do spend 60 miles each day doing 80-85 and sometimes I have to hit 100 on the short passing areas. I wont do it but one time but I also want it to be vibration free when I see what its top speed is.
The highest I took mine with 3.73's was 140mph with no issues. I mean, if I were to do such a thing, I think it would do it without issue.
NoLimit95
Dedicated LVC Member
Laser, when you talked to Max on the phone, did it have a lot of static on his end? I ordered some stuff today from him and the static in the line was kinda on the loud side. I like dealing with him though, especially the discounts.
Nope, the line was always clear when I spoke to him. Ordered several times through him as well. Crap, now I have to search for a 93 shaft in my area. Not holding my breath... unless someone has one they want to sell me.
NoLimit95
Dedicated LVC Member
Maybe he picked up a junk phone when I called this morning. I have a 93 shaft but it's cut in 1/2 lol.
kustomizingkid
Dedicated LVC Member
I'll sell you one... $100+shipping
danny_holtermann
Dedicated LVC Member
Well then I may just save $400 and get the 93. I do spend 60 miles each day doing 80-85 and sometimes I have to hit 100 on the short passing areas. I wont do it but one time but I also want it to be vibration free when I see what its top speed is.
you need to stop cramming miles on that car and get a beater
NoLimit95
Dedicated LVC Member
and shipping would be?
Screw-Rice
Dedicated LVC Member
Bill check out car-part.com too, which I bet you know already.
Found a couple local for $50 and $80.
Found a couple local for $50 and $80.
kustomizingkid
Dedicated LVC Member
Depends on where you live!
NoLimit95
Dedicated LVC Member
Madison, AL. 35758 and would this be considered a mod? I don't want to get addicted or anything.
kustomizingkid
Dedicated LVC Member
Prolly tack on $25 for shipping...
NoLimit95
Dedicated LVC Member
KK, let me make sure that the DS I have isn't a 93 first. I just went and looked at it and I got the 2 halves of the 93 shaft that was cut and it looks just like the 93 shaft. I don't see any welded pieces near the ends or anything. If it turns out to not be what I'm thinking, I'll get one of those from you.
Anyone have true picture differences to look at?
Laser, sorry for hijacking the hell out of your thread.
It is my beater. I bought it so I wouldnt put miles on my Cobra that I no longer have. Besides the car is in over all great shape so if I killthe engine then ill just drop another one in.
KK, let me make sure that the DS I have isn't a 93 first. I just went and looked at it and I got the 2 halves of the 93 shaft that was cut and it looks just like the 93 shaft. I don't see any welded pieces near the ends or anything. If it turns out to not be what I'm thinking, I'll get one of those from you.
Anyone have true picture differences to look at?
Laser, sorry for hijacking the hell out of your thread.
Not my thread. You are taking my Koolaid though!
if you compare the weight between the 1 piece and the rubber/bs filled two piece shaft it could be considered a mod.
kustomizingkid
Dedicated LVC Member
There is a good pic floating around... can't find it right now....