oil pan

L

linclov

Active LVC Member
Joined
Sep 16, 2005
Messages
76
Reaction score
0
Location
Parry Sound
apperently my oil pan is needing to be replaced...the ford dealer here in ontario where i live can't find one..any suggestions and how hard is it to replace..is there a site that will show me
 
talk to jamie97lsc, i'm sure he has some oil pans lying around for a good price
 
It is a pretty hard deal to do, support the engine across the strut towers, put the car in the air, remove the lower strut mounts, unbolt the power steering lines and steering joint remove the 8 sub frame bolts and engine mounts and drop the sub frame out, replace the pan and put it back together.
 
I know that Standard Auto Wreckers in Markham has a GenII on the stacks, maybe you can get the pan from them. They are online as well but the car is in the Upull section.
 
LSC HUNTER said:
I know that Standard Auto Wreckers in Markham has a GenII on the stacks, maybe you can get the pan from them. They are online as well but the car is in the Upull section.
Click to expand...

I was just at Standard 2 weeks ago and the Gen2 that I saw back in Dec/Jan was gone and I didn't see any other Mark's

I saw this one back in late Dec, early Jan:

30-12-09_1244.jpg
 
i have a gen 1..1995..if it makes a difference..i don't know
man i hate salt and winter
 
nice to know other members from ontario..buy the way lets see how many we have in ontario that way we could keep in touch and maybe get together..parry sound is not far from T.O.
 
Well I was there maybe 4 weeks ago I guess they crushed her.

I was going to head back this weekend or hope that it was still around for the $50.00 all you can carry parts day.
 
Tiltedhalo said:
It is a pretty hard deal to do, support the engine across the strut towers, put the car in the air, remove the lower strut mounts, unbolt the power steering lines and steering joint remove the 8 sub frame bolts and engine mounts and drop the sub frame out, replace the pan and put it back together.
Click to expand...

id unmount the upper strut mounts rather than the lower with a rust belt car and just pull the air lines. you can leave the ps lines connected to the rack just unbolt the holders, you gotta unbolt the steering column from the rack though. and before you ask those funny lookin bolts that hold the subframe in they are E-18 inverted torx, although some say :shifty:jamie:shifty: lol a 9/16 6 soint socket will do
 
You must log in or register to reply here.

Members online

No members online now.
Total: 656 (members: 0, guests: 656)
Back
Top