Lincoln LS Aftermarket Emblems!

Lincoln LS

  1. 1LoudLS

    1LoudLS Dedicated LVC Member

    Messages:
    9,902
    Likes Received:
    350
    Joined:
    Mar 31, 2008
    Location:
    Ann Arbor
    1: the last post was made over 11 years ago...

    2: the guy selling these (the OP) shows as an unregistered guest, so its self to say hes nolonger involved with this site and will never see that message

    3: thanks for at least searching
     
  2. Alax7

    Alax7 Dedicated LVC Member

    Messages:
    7,816
    Likes Received:
    38
    Joined:
    Dec 18, 2008
    Location:
    LA
    For a sec there I thought grayghost was back

    Sent from my VS820 using Tapatalk
     
  3. RigsLS

    RigsLS Dedicated LVC Member

    Messages:
    7,761
    Likes Received:
    516
    Joined:
    Mar 10, 2012
    Alex, u by chance still molding clear blanks?
     
  4. Alax7

    Alax7 Dedicated LVC Member

    Messages:
    7,816
    Likes Received:
    38
    Joined:
    Dec 18, 2008
    Location:
    LA
    I haven't in a little while but still can. I was going to do a bigger/better mold for it but I sent out some material for someone to machine out for me for a large pressure tank I started building but the guy disappeared and kept my material. How many did you want?
     
  5. RigsLS

    RigsLS Dedicated LVC Member

    Messages:
    7,761
    Likes Received:
    516
    Joined:
    Mar 10, 2012
    I'd take 6 or so, maybe even 10

    blanks, that is. no coloring.
     
  6. EricY

    EricY LVC Member

    Messages:
    24
    Likes Received:
    1
    Joined:
    Oct 4, 2014
    Location:
    Kitchener
    If it helps Alex I would also be interested in a couple. I live in Canada like Rig does
     
  7. RigsLS

    RigsLS Dedicated LVC Member

    Messages:
    7,761
    Likes Received:
    516
    Joined:
    Mar 10, 2012
    That's it ... Canada looking for some blank Lincoln LS emblems.
     
  8. 970bro

    970bro New LVC Member

    Messages:
    2
    Likes Received:
    0
    Joined:
    May 30, 2017
    Location:
    Fort Collins CO
    Hey, currently doing some body work on my 03, are you still making these??? I'd love to but a front n rear set. Mine are junk n keep cracking as I keeping sanding off the paint on mine. Let me !! Thx.
     
  9. RigsLS

    RigsLS Dedicated LVC Member

    Messages:
    7,761
    Likes Received:
    516
    Joined:
    Mar 10, 2012
    ^


    Welcome to LVC.



    GrayGost1 is an old member from back in the beginning when McLaren grills first where offered.
    He ran a small distributing company and in fact did service this LVC Lincoln forum with a few LS goodies.
    Then things went south ... and web links were removed.


    They are no longer being offered and Ford Lincoln wants you to buy the upper front grille or rear surround to get one. They are not offered as a separate part number.

    Salvage Pull It Yourself yards, find an LS, spot the grille or rear plate surround.
    Gently with hair dryer and good fish line remove the emblem slowly. Any bending or twisting of the emblem itself causes the inside black and silver inlay paint coloring to crack and severely show through from the facing side. Ask me how I know. actually don't, just pay for the grille rather then trying to separate it at the yard. ;)

    After that you can use a slight drip using 'I think' acetone, to clear or lift the inside coloring. (if choosing to recolor)

    The front side can be polished up, in many ways. Can even be 'cleared' afterwards.

    Good luck :)


    .
     
    Last edited: Jun 13, 2017
  10. RigsLS

    RigsLS Dedicated LVC Member

    Messages:
    7,761
    Likes Received:
    516
    Joined:
    Mar 10, 2012
  11. 970bro

    970bro New LVC Member

    Messages:
    2
    Likes Received:
    0
    Joined:
    May 30, 2017
    Location:
    Fort Collins CO
    Thx
     
  12. AAV17

    AAV17 LVC Member

    Messages:
    29
    Likes Received:
    2
    Joined:
    Jul 8, 2017
    Location:
    Dallas TX
    Do these still exists? If so im willing to buy a pair from any one who has them.
     
  13. RigsLS

    RigsLS Dedicated LVC Member

    Messages:
    7,761
    Likes Received:
    516
    Joined:
    Mar 10, 2012
    Post # 34 was a good read.
     
  14. Shawn Fife

    Shawn Fife LVC Member

    Messages:
    11
    Likes Received:
    4
    Joined:
    Jan 18, 2017
    Location:
    Toledo
    Rigs you crack me up
     
  15. RigsLS

    RigsLS Dedicated LVC Member

    Messages:
    7,761
    Likes Received:
    516
    Joined:
    Mar 10, 2012
    Might have to start using bigger fonts or just give up all together.
     
  16. 1LoudLS

    1LoudLS Dedicated LVC Member

    Messages:
    9,902
    Likes Received:
    350
    Joined:
    Mar 31, 2008
    Location:
    Ann Arbor
    or post 26...


    probably this.
     
    • Agree Agree x 1
    • RigsLS

      RigsLS Dedicated LVC Member

      Messages:
      7,761
      Likes Received:
      516
      Joined:
      Mar 10, 2012
      Wait to you see my new bumper sticker!!!
       
    • Shawn Fife

      Shawn Fife LVC Member

      Messages:
      11
      Likes Received:
      4
      Joined:
      Jan 18, 2017
      Location:
      Toledo
      I'll only look if you sell me those lse taillights...
       
    • RigsLS

      RigsLS Dedicated LVC Member

      Messages:
      7,761
      Likes Received:
      516
      Joined:
      Mar 10, 2012
      1.jpg

      2.jpg




      :D


      .
       
    • RockLSonDubz

      RockLSonDubz LVC Member

      Messages:
      37
      Likes Received:
      12
      Joined:
      Jul 25, 2017
      Location:
      Vancouver Island,BC,Canada
      Just to inform every one on the forum who may look here and are interested in after market emblems knows, I have a 3d printer and don't think printing off custom emblems would be too hard.
      I can also cover them in metal if I electroplate them.
      I've been working in Tinkercad for awhile and could easily have an LED (or more) to make the emblems glow, or set some fugazzi diamonds or whatever you may think of and I'm not an A-hole out to get rich printing off custom parts or someone who wants to make 100$ on every 3$ in plastic I use. I don't have many colors right now ;but am constantly ordering rolls on for cheap.
      I'm going to start my own thread in regards to all the things I can make custom for people if they're interested . Right now I'm working on a bunch of designs to give us some functional storage space and a bunch of other practical mods.
       
    • AAV17

      AAV17 LVC Member

      Messages:
      29
      Likes Received:
      2
      Joined:
      Jul 8, 2017
      Location:
      Dallas TX
      Interested in emblems. When u get a chance post some pics to show how they come out.
       
    • RockLSonDubz

      RockLSonDubz LVC Member

      Messages:
      37
      Likes Received:
      12
      Joined:
      Jul 25, 2017
      Location:
      Vancouver Island,BC,Canada
      I will for sure, I just have to finish up my custom fan shroud and blades I'm working on right now ;but will get to designing some emblems up right away. I hadn't even thought about it til I seen this post.
       
    • AAV17

      AAV17 LVC Member

      Messages:
      29
      Likes Received:
      2
      Joined:
      Jul 8, 2017
      Location:
      Dallas TX
      Glad I Posted asking about them
       
    • Danthaman927

      Danthaman927 New LVC Member

      Messages:
      8
      Likes Received:
      4
      Joined:
      Mar 7, 2019
      Location:
      Michigan

      Lol could you bring back the cobra emblems with the lincoln logo in the back and I’ve been looking for the LSE trunk logo for the longest time I just got a gen 2 ls that I’m looking to do a total makeover on and I would love some custom emblems
       
    • Danthaman927

      Danthaman927 New LVC Member

      Messages:
      8
      Likes Received:
      4
      Joined:
      Mar 7, 2019
      Location:
      Michigan


      The cobra star emblems for the ls

      8491A6E7-42E2-4518-87CD-1CBD87758482.png
       

    Share This Page

    1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
      By continuing to use this site, you are consenting to our use of cookies.