jamie - what do I use to get the funky clamp off?

[MsM8tress]

jamie - what do I use to get the funky clamp off? I dont want to break it, but I'll be danged if the stupid thing wont come offa the post

 

[BAD97LSC]

for the headlights? i just use a thin blade flat head, in the top of the clip you will see a small square hole, i put the blade in that and gently pry up. or use the correct tool for the cry babies that will say i dont do it right, and go buy snap ring pliers.

 

[MsM8tress]

well those babies became a part of the car! lol I tried the flat head, but the funky little clamps on the sides were not letting go of the car - they came off of the light fine. A few good smacks with a little hammer finally got them off - gesh coulda been a five minute job! the rest was no problem - I can't wait to go for a ride tonight! what parts did you say you wanted back?

 

[BAD97LSC]

your old housings, i'll refund you 30 bucks if you send me the old ones, as long as they are not broken physically.

 

[MsM8tress]

define "not broken".......

and I CAN SEEEEEE!!!!!!!! WOW!!!!