gas pedal cable

[topher5150]

How do I get the cable off of the gas pedal?

 

[BAD97LSC]

grab the pedal and lift it up away from the floor, while doing this, take a small flathead and pop the black grommet out of the top of the pedal arm, there is a small slit in the top of the pedal arm, popping out the black grommet allows the cable to slip out.

 

[mafioso]

Any way to adjust the throttle linkage? mine appearantly has too much slack and something it wont WOT.

 

[94m5]

you running a stock gen1 intake mafioso?

 

[mafioso]

yessir

 

[94m5]

ok,



None of the 5, Gen1 VIII's we've owned open all the way. just slightly askew from fully open.


Mike

 

[mafioso]

When the Carpet was replaced its a little thicker due to the layers of sound deadner, and thicker carpet padding, so now I have to really mash it to get WOT and just want to know who to fix that.

 

[BAD97LSC]

pull some of that crap out from behind the rug, there is no adjustment on a gen 1 throttle cable.

 

[kustomizingkid]

Bend the hell out of the pedal Mafioso!

 

[mafioso]

hahaha bending the pedal is an option but I think Im going to redo the carpet again.