can I use these

[96 shaker]

http://www.ebay.com/itm/Black-Musta...r_Truck_Parts_Accessories&hash=item460e05c620 mark has hub swap and 1.5 lowering springs

 

[DieselDan]

The offset is wrong...

Somebody may need to correct me but you would want a 30 on the front and 40 on the rear for a 9/10" wheel setup.

 

[Markviiiedrea]

I would almost be certain that you will rub with a 1.5 drop and 10's on the back.

 

[lobird91]

Offsets will work just fine.
The 10" rear wheel may rub if the suspension is under compression.

A 295/30-20 is about a 1/2 inch wider and 1/10 of an inch taller than my 285/35-19s and it will be pushed 3mm closer to the fender than my 19x10 48mm offsets.

I would not have had to roll my fenders if I had put my Cobra Bilsteins in first, it doesn't even come close to rubbing after the roll and shocks.

-Alan

 

[ford nut]

+1 on the should clear vote.
Makes a hub swap a must as the mustang wheel choices explode.
More Here

 

[DieselDan]

I thought that 98lincmk7lsc's setup was 30mm and 40mm, I always kept his in mind for when I picked wheels. I hope maybe he'll come in here and clarify.


Click!

 

[UltimateSVT]

http://www.ebay.com/itm/Black-Musta...r_Truck_Parts_Accessories&hash=item460e05c620 mark has hub swap and 1.5 lowering springs

I think the offset is a little off but regardless, those wheels are "jizz in my pants" material!

 

[Sapperfire]

Nice, 20s are a bit much for my taste.. but I wouldn't mind those

 

[97MarkJA]

We really need a wheel sticky with pics!
Wheel size, offset, tire size, suspension mods, fender roll, and bolt pattern. ( year and car they came off of if factory)

 

[lobird91]

I agree a sticky never hurts, I have listed all the specs for mine in previous threads but will be happy to do so again if someone will create it.

-Alan

 

[Markviiiedrea]

We really need a wheel sticky with pics!
Wheel size, offset, tire size, suspension mods, fender roll, and bolt pattern. ( year and car they came off of if factory)

Agreed.