Breaks Grinding?

[M4rk]

Hey mens,

I have been hearing some grinding noice coming from my breaks when I break at a stop light and stuff. I took the rim off and took a picture:

Halp?

 

[joegr]

Yes, I think that those brakes are broken.

Where did the picture actually come from?

 

[BlackLS06]

The breaks look fine to me. Just replace all 8 coils and plug wires and youre set!

 

[Bullschmidt]

Probably a DCCV problem. Are you getting heat out of all your vents?

 

[Ben's LS]

That'll buff right out

 

[RigsLS]

Yes, I think that those brakes are broken.

Where did the picture actually come from?

from http://imgur.com/

Probably a DCCV problem. Are you getting heat out of all your vents?

CLASSIC, best post of the day !


@m4rk,
those would look like normal wear patterns for all those drunken indians you live around/with!

 

[Bildabo]

so THATS what slotted rotors look like.....

 

[hite337]

I'd be more concerned with that tie rod end

 

[G-RELL]

should be able to get one more turn out of those before your outa spec....

I had won similar to that i pulled of a car years ago... unbelievable

 

[05 LS8]

Mark, sometimes bent sliding pins will cause that. I would just replace them.

If that doesn't fix it, it's most likely the vent tube on the battery.

 

[scjmc]

When I worked at a shop in highschool we got this Grand Cherokee in on a flatbed with a "bad oil leak." The problem was that the oil filter had rusted though.

unbelievable....

 

[jmtiseo]

Probably a DCCV problem. Are you getting heat out of all your vents?

I see what you did there. Very noyce!

 

[1LoudLS]

so THATS what slotted rotors look like.....

actually those are just vented!!!

 

[LS4me]

Whatever it is the rotor is very loose on the lugs.

 

[cmack]

oh snap you got the new stay cool rotors. the pad just slides into the grooves and stops the car. Thus keeping all parts cool.