Anyone need Ivory Gen 2 parts?

98lincmk7lsc

Dedicated LVC Member
Joined
May 9, 2004
Messages
3,913
Reaction score
119
Location
Columbia, SC
Interior, or exterior....It's a 98.

Rick Ross left his Mark VIII at the local junkyard. I already got a bunch of parts, but I'm going back on Saturday to get the rest of what I want. Figured I'd offer parts up for others. The car is in pretty decent shape. I was surprised that it was in there.

Let me know through here or PM...
 
I need both seat bezels. the black trim on the passenger side mirror.
 
I need the drivers seat covers and the heat pads if it has heated seats... door shells would be nice too but shipping would cost way too much.
 
I'll take the head bolts, and the u joints

Well, I've got family in town, so I wasn't really planning on getting THAT far into the car. Maybe later next week. Besides, don't you have some head bolts on the way. You probably don't want used u-joints either.
 
I need both seat bezels. the black trim on the passenger side mirror.

The driver's side seat bezel is crap, and not worth getting. I think the passenger side was in good shape though. I'll grab it.

Also, the passenger mirror was smashed, I assume from it being moved around on a forklift. I may have that piece in the garage though. I'll let you know.
 
I need the drivers seat covers and the heat pads if it has heated seats... door shells would be nice too but shipping would cost way too much.

Doesn't have heated seats. I'm not sure the driver's seat is all that great. I remember it wasn't horrible, but also wasn't very nice. The passenger seat looked really good though. I think the rears looked good too. You could get the fronts re-covered with the rear seat skins if you wanted. Want those?
 
yeah jeremy i hope to god you were joking. you might was well wash the car with brake fluid and fill it with diesel too, because both those idea's will be as smart as used head bolts and u-joints!
 
Well, I've got family in town, so I wasn't really planning on getting THAT far into the car. Maybe later next week. Besides, don't you have some head bolts on the way. You probably don't want used u-joints either.

And the #6 piston rings,
 
the driver's side seat bezel is crap, and not worth getting. I think the passenger side was in good shape though. I'll grab it.

Also, the passenger mirror was smashed, i assume from it being moved around on a forklift. I may have that piece in the garage though. I'll let you know.

aight cool.
 
Alright, here's some of the stuff I got today...

Some interior parts...the second pic shows small cracking near the front. All other mounting points look great and are not broken. I haven't cleaned this stuff yet....
IMG_1660.jpg

IMG_1663.jpg


Ivory Door handles....the driver's side has a small chip in the paint at the bottom in the center...

IMG_1664.jpg


Strutmasters coils with Monroe Sensatrac struts...

IMG_1656.jpg

IMG_1657.jpg


Valve covers...

IMG_1658.jpg

IMG_1659.jpg
 
A chrome grill...has a couple small scrapes at the bottom...

IMG_1669.jpg

IMG_1670.jpg


All 4 ABS sensors.....Anyone know how to test these?

IMG_1671.jpg


Coolant crossover tube...

IMG_1672.jpg


The Ivory cupholder, needs a little cleaning....

IMG_1675.jpg


And a K&N panel filter...

IMG_1676.jpg
 

Members online

No members online now.
Back
Top