Search results for query: *

Hey guys, I just got back from a buisness trip to Washington DC. First time I have been there but it was on the company's dime so what the hay. But anyway I was amazed at the amount of taxis. You see it on tv but it's not quite the same. Almost every cab in DC is a Lincoln not to mention the...

The noise comes from the front end for sure, but when I push down on the fender nothing, so I dont think its the shocks, when I converted over to the springs would this put extra pressure on the ball joints and bushings?

:confused: It's a long story, I bought this 86 markvII for $700.00 2 years ago. It had a bad air bag on the passeger side on would not inflate at start like it should. I am not a mechanic and knew nothing about lincolns or the 302 that was in my car. Any way I got the car and bought the coil...

Job Done By moving the dist. it gave plenty of room to reach the bottom bolt with a closed end 1/2 wrench. No leaks! make sure to mark the spot of the dist. as to get it back to where it was. I got lucky 2 turns on the bolt and it moved like butter. Thanks for all the feed back. :)

Hope It Don't Leak Well the alan bolt did not do the job, but moving the distributor over about an inch gave me the clearance I needed to get to the bottom bolt. Now just waiting for the silicone to dry. Hoping I got the dist back in its right spot. Welcome to the wonderful world of fords...

Thanks I got three good ideas, thanks again guys your the best. I am going to try old schools idea fisrt, (replacing the bolts with alan type bolts). I don't really want to mess with the dist. I'm Not that mechanically inclined.

Looking for advice on replacing thermostat housing. The bottom bolt is a real bear. 1986 mark vii is there a special wrench?

Dont you see the boat in the upper right? No just kidding I got the old 78 for that it's only got 80,000 miles on it. This truck is the reason they had to invent airbags. F250 Custom 4 wheel drive 351 modified.

Arnott Owner 2 months ago I bought the coil spring conversion kit from arnott about two months ago. The parts are sweet hand machined, The guys in florida do a lot of this stuff, make sure you do your shocks and struts at the same time. With parts and the mechanic I paid around $650.00. Then...

Still Got Em I will sell cheap if anyone is interested.

Works For Me :L I still have the 215 60r16 on 16 inch rims, sure looks sharp. The back tires rub if I have weight in the back as in kids or passengers only on strong bumps. But for me and the old lady it's cruising time. A matter of function before form I suppose?

I love this ride don't get me wrong. Why else would I put over 3 g's into a car I paid only $700.00 for. Just had to tell everyone what I have done with her. Battery, Alternator, starter solonoid, voltage regulator, serpentine blt, high pro sparg plug wires with bosh platinum plugs, coil spring...

[SIZE=3]Just won my first race in this car. I have only had it for about six months. I was at a stop light and this little Accord pulls up, reving his 4 banger he looks over at me and smiles. The light turned green, I hit it perfect and he spun a little All I could see was the little H on his...

My first car 1980 Datsun 310 GX hatchback (wrecked) 1971 Chevy Elcamino (No money to restore) 1989 Dodge Dakota (Gutless POS) 1978 F250 (Big Red) Still Own 1986 Mark VII LSC I also had a Pinto and an Oldsmobile cutlass somewhere in the early '90's

I dont have $800.00, My brakes gave out about forty miles from home last week. the pedal became very hard pulling to the right and there was a ticking noise inside the cabin coming from the brak pedal. I pulled into Les Schwab ( local tire store) and they knew nothing about it, the system that...

Sorry Old School I dont have much info. I do know that he was asking $17,000 and the list of mods was too long to remember. I seen a convertable on there the other day it was a '90 with only 58000 miles.

I was scanning ebay and found this 86 Mark. Thought I would share! :Beer

I've got a few minor problems with my Mark VII 1.The passenger window will go down but not up? The motor runs but won't push the window up. Is there a gear assembly inside the door panel? Are the parts available? 2. Brights don't work? When I hold back on the lever they stay on but as soon...

Did You Fined Em Tommy did you find some nice covers to fit our seats? 86 markVII:feedback