Search results

RestoMod project. I am using a 1997 MarkVlll as a donor for a 1954 Ford Ranchwagon. I am using the entire platform under the Ford body. Today's problem is that the passanger front seat is all the way to the front and I need to move it back to properly locate it. Which of the wires at the loom...

Thanks, I made a first attempt that didn't work, but ended up going through the Radiator support. Will build a mesh screen in the grill area too.

F7LB-13C788-AP? Can anyone tell me what this module is/does? from a '97 markVIII base. Has 4 wiring plugs. I have a wiring diagram for a '95 but can't find this module on it.

Does anyone know of a cold air intake kit that will fit the Mark VIII engine? I have installed a '97 Mark VIII 4.6L engine in my '54 Ford, actually the entire Mark platform including front suspension, K member etc., but the area where the original air box/filter unit went is way to small for the...

Thanks , I will go to a local tuner and we will figure it .

Thanks

Need advice. I am building a 'restomod' '54 Ford Ranchwagon with a '97 MarkVIII platform. I have all the stock exhaust system but am wondering if the Cad's can be replaced w/ pipes w/o messing up the signals to the oxygen sensors and engine control computer. I also would like to dump exhaust out...

consoul, '97 black I've tried to load a photo of the full consoul. sorry if I missed a request. Are you interested in the whole consoul or just the lid? (Shippng cost). If you want it for $25 plus shipping please acknowledge at ronbaugher1@att.net

I removed mine from donor that was NOT to be saved by sawzalling the Radiator support and running three ratchet style straps around the engine. I also unbolted the master cylinder to clear vertical lift just enough to clear the motor mounts. With the trans cross member out and exhausts free it...

I found a You Tube on the JMOD and it looks easy enough. Thanks.

Excelent

Thanks guys, you are awesome. The piece missing (at least I don't see it) is item #1; "Evaporative Emission Tube", 9D661. Otherwise it seems to be just what I need. Diagram is for '96 and on the '97 I think that the vent tube and filter go into the far back corner of the wheel well instead of...

Does anyone have pictures and/or diagrams of the fuel supply routing for a '97 Mark VIII? The R/F wheel got shoved back into the firewall of my donor car and wadded up the fuel supply and return lines that run through there. There was also a lot of what looks like charcoal granduals in the mix...

Thanks guys, my confidence is up. Is the "AB Controls"? I'll search it out. Thanks again.

I do still have the orig. spindles, hubs, rotors and calipers. The Mark rotors are a little bit larger too. The Right side is where the impact happened and I know that both upper and lower support arms were bent so I'm leery about using the spindle. I guess I can put it together and check alignment.

curious what 'hydrodip' is? I had to modify my door panels to fit a Resto-Mod project I'm doing and had to shorten that woodgrain trim piece. The cut off edge isn't too pretty. I was thinking about having them recovered somehow or painted to match exterior color.

I have a console that got damaged by tow people when they threw metal scraps into the car after wreck. The arm rest/lid is actually pretty nice. Black from '97 MarkVIII Base. Is $25 plus shipping good for you?

I am rethinking the ABS bypass. Since I already have the components, a little bit of re-locating and tubing bending and it should work like any other MarkVIII. When I mounted the Tbird (Spring) front K member I kept the 'bird's spindles and hubs, which I don't think have the sensors (Non ABS)...

Intro; I am using a '97 MarkVIII Base Platform for my '54 Ford Ranchwagon Resto-Mod project. The Donor Mark had major R/F damage to the body and suspension. I am using the front 'K' member/suspension from a '96 Tbird (Springs) and replacing the rear airbags with springs and jack screws, so I do...

I recently purchased two Octastar wheels and he had two more for sale (about 10 days ago). PM me and I will give you the contact info if you are interested.