Search results for query: *

OK, so, I bought some Bosch 4-hole injectors to "spruce" up my fuel system. Also got a Walbro 255 pump and brand new Motorcraft fuel pressure regulator. The injectors I got are 12559036 (other number listed on them are 0280155923) they're 24# high impedance EV6 injectors. Along with these...

Anyone use a variable instead of a fixed? I live in Florida (obviously) and the temps get way up during this time of the year. I do most all stop and go and light to light driving. I understand variable is suppose to help with the high temp climates and increase idle cooling. I'm rebuilding...

You can feel it when stopped, like a "putt putt" feeling real quick and then it'll go away or it'll just happen really intermittent. Once she's good and hot, if I shut it off and start it back up a few minutes later, it runs like absolute crap for a a good 20 seconds and then it's normal but...

I'm trying to find a Motorcraft IAC Valve. I put in a BWD about a year ago and I'm having issues associated with a bad IAC Valve. I have been looking online the last few hours, bouncing ideas off some guys on Facebook. The one for my 93 is Motorcraft CX1649 which I cannot find anywhere for...

Does anyone have just the harmonic balancer for sale by chance? I know there is a Parts Wanted section but nobody ever responds in there. I have a seller who has the water pump and alternator pulleys, new, but he used the harmonic balancer. I looked online everywhere and I'm having no...

Preferably without having to use injector adapters. I was told 2000 Ford Taurus with the Duratec engine has the 24#/4-hole injectors. I pulled some off one at the JY but I'm not positive they're 24#. Any insight would be great. I'd really like to update to the 4-hole injector and I'm...

I pulled the chunk from a 2000 Explorer (Eddie Bauer Edition) this weekend, which of course has the 3.73 LS. This is the EXACT setup I wanted, and it was from an abandoned vehicle, so it cost me nothing. I couldn't pass it up. Now of course I was informed it's a 31-spline and I'll need to...

Has anybody done this before? I haven't pulled mine off in over a year, so I can't remember what I ran into last time, but I'm sitting here with my other 93 wheel I'm going to be putting in this weekend when I swap interior (again) that I want to put the 96 illuminated buttons I saved from my...

I've done some research and had a few different brands come up as options. What is the best paint to use for painting our dashes? Also, for anyone who might know or might have done this before, I need black to match a 93 stock black so which would be the best match (brand wise). I'd like...

About to go pull an entire interior out of a JY car today (minus the seats) but I have to get the seats out to get the carpet. Car obviously won't have a battery and we all know the joys of trying to get a seat out when you can't move them. I've never attempted to remove anything that...

Just need confirmation that this is the correct location of Hole #8 for a 93 separator plate.

Been researching a bit and I just want some clarification on this swap. 1) Is it the "short" build or the "long" build? 2) Do you re-use your pulley when you swap the pump out? 3) Motorcraft or bust? I've found a few on eBay, and wouldn't mind some opinions. Used Ford Pump Bosch...

http://youtu.be/9i8ZbHknw7Q He had me initially, but I ended up winning by close to a car length.

I had heard before that there was a pretty rare stock transmission cooler package, add-on, recall addition, whatever it was, on the Mark VIIIs. I've only seen one person post a picture a ways back about the stock bracket and cooler. Today, I went to the junk yard I always scavenge to to look...

Anyone know the size? I BELIEVE mine is leaking, and I want to change it this weekend. I looked it up on Rockauto and came up with ATP Part # JO15. Referenced that on e-bay and the size comes up as 3/4" outside diameter, 5/16" inside diameter. I've never pulled a tube before, so I'm likely...

So, I've been posting here for a couple months now since I came into my Mark. Quick back story: My little brother purchased the car back in March 2013 and shortly after his work dropped his hours a lot. He wasn't able to keep up with the cost of gas in this beast, and I had two cars at the...

Alright so I was told the 2000 Ford Taurus needles were cross compatible with the Mark VIII. I ran across one in the JY with needles in excellent condition so I grabbed them. Tore into my cluster today and went to replace mine. Only the speedometer needles match, the others have a "hole" on...

I pulled a black shift knob from a 96 parts car but had a really hard time getting it out. I want to swap it into my 93 in place of my cracked/faded tan one. Can anyone explain how to properly remove and swap it please?

I've discussed this on the Facebook page, but I'm going to pick up a '96 LSC parts car on Sunday with immaculate interior. I plan on definitely changing all the seats and at least door panels, though I'm considering going as far as the entire doors and the entire dash. I've done some research...

I'm having a really hard time deciding on this. I've read quite a bit, including on here, that the stock air system is actually pretty good on the Mark. I was originally planning on trying to figure out how to set up a cold air intake before I found this site and read what I read about the...