Search results for query: *

well i traded my lincoln for a jeep, it didn't go far though , my brother has it so i'm sure it will still get raced and modified and broken and back in my possession ...lol

i'm sure this has been brought up , but the forum search isn't working the bat light came on a couple nights ago , kinda flickering , i turned all of the accessories on and it dimmed and went out so i figured it was over charging , i'll replace the alt. , i had to limp it home and the bat...

http://gallery.godragracing.com/gallery/atco_index_10-2005/IMG_1951 to bad it only ran a 12.70 on that pass

damn they work good , i'm gonna try them out at atco thursday night maybe tomorrow with out the nitrous

saturday morning i swapped out the front air bags with coils , i didn't bother with the rears because they are in good shape and i like the way they ride the coils seem a little more sensitive to road imperfections but i am happy i did it (it took less than an hour ) only problem i am having...

anyone hold any luxory car shootouts , mark 8 shootouts , or lincoln shootouts anymore i know there are some really fast caddy's ,mauraders , impalas , etc or is anyone interested in starting one in the north east area or is everyone scared of some of the 10 second turbo benz and caddy...

new low et for me :Beer on regular junk 225/60 radials and a 150 shot 60'......... 1.82 330'........ 5.191 1/8......... 7.972 1/8 mph... 88.18 990'........ 10.35 1/4......... 12.571 1/4 mph... 101.13 i have to get a chip to remove this speed limiter , the car stops like it hits a...

so i ran the car last night , the only changes from the last time were 4.10 ,tracloc and 245/55 tires previous best was 14.60 at 98 2.18 60' previous best in similar conditions was 14.71 at 98 2.22 60' last night i made 10 passes cooled down and hot ,different launches etc best pass was...

well the gears are in , but the speedo gear isn't ...lol i hope you guys are right about it being limited to 98mph i tried it out on our measured 1/4 mile and the limiter stops the car way befor the end it shifts insanely hard into 2 and 3 , it actually gets sideways going into second :)...

have there been a couple designs of the factory intake tube in all of the pics i see they are kind of smooth and rectangular mine is more rounded looking and has a bunch of restrictive looking stands running down the middle of it , i guess they are used to quiet them down i took off the...

i'll have the rear apart anyway to install the trac loc , and i have a set of 4.10's just sitting here i wasn't going to change the gears because the .2 improvement i've seen from the 5 other cars i've owned , just doesn't seem worth it but if it is going to be .5 then i would do it so has...

so i'm on my way to work this morning , and see a 96 or so corvette stopped at the light i jumped into the next lane , didn't want to miss this opportunity the light turned green and i left , he obviously wasn't ready , because i got out about a car and a half befor he left he left and got...

i have an 8.8 "posi" diff ,who has installed one in the stock mark viii housing when you install them do you change the side spider gears or are you just popping the axles back in and leaving them alone the reason i'm asking is because the stock spider gears aren't machined for the half...

will anyone be attending the NMRA race at Maple Grove on June 10-12 if i can keep the car together that long i'll be running in Modular Muscle , or maybe True Street

its only been a month :Bang shifts great , money was tight so i couldn't get the converter i wanted , ended up with a rebuilt stock converter , only 2000 on the foot brake and flashes to 2500 , it may go a bit higher on the bottle i can't wait to get to the track

anyone in jersey have some 15x7 or 15x8 rims that will fit under my car , so i can put my slicks on steel or alum , as long as they don't stick out

i have looked on several mod motor , lincoln and mark 8 sites , and it seems that there are some pretty quick mark's out and about i know every one who is driving and racing them are not on the boards any ideas on maybe the top 10 cars i'm not talking about tube chassis or backhalf cars...

will it fit?i found some soft compound hoosiers someone is selling pretty cheap just wondering if they will fit on the rear of a mark8

any tricks to removing the transmission in mark viii's i'm pulling it out tonight , just trying to see if there may be an easy way will i have to drop the tank to get the driveshaft out , i'm sure the exhaust is in the way

i know i should put this in the classifieds , but i'm not sure anyone looks in there complete gen1 intake with throttle body air intake tube , just the plastic piece from the mass air to the tb differential , just the center housing caps and yoke, i don't need the gears or carrier