Recent content by Sifrino3

Rear mounting question - If the Mustang lower arm bolts up and works. What spring should I consider and where? What do I have to do for the upper seat of the spring? After all said and done, how can I re center the rear wheel? Even now, its a little forward because of it being lowered on the...

Caster Comber kits - What year mustang works, should I stay with the SN95 version? Is there a year that bolts up to the Mark VII? Can I use them with the QA1 Kit?

QA1 Single Adjustable pro coil system - Biggest question, considering the Mark is heavier. wouldn't we agree on using a stiffer spring and longer travel? 175 200 or 250* spring? Compressed height - 13.07 14.62 or 15.07*? Extended height - 19.31 20.87 or 21.23*? Or am I miss spoken?

Im looking to convert my 88' Mark VII to a fully adjustable coil spring suspension. The front end seems simple enough. You buy the front kit, like the single adjust QA1 pro coil system. Hardest part choosing spring poundage and working the adjustable caster camber kits. First question, whats the...

Been busy, work with two kids. Plus, I have been more into bikes. (2007 Yama YZF-R6 & 2004 Buell XB12R) Doing the Lincolns on the side (Mark VII, Supercharged, five speed, w/ supporting mods) or just messing around with my wifes LS. This is our second one. I have been around though. Every once...

I have a 2002 Lincoln LS 3.9L. It does have Magnaflow exhaust and intake. I have never had a problem until the last few weeks. It started with a small mis every once in awhile at low speed acceleration. Then it was at any speed, low throttle. Now I changed the plugs, someone put Fine-wire...

Now considering you have a coil on each cylinder. Lets say your having a miss on cylinder #4 for example. Switch the coil out from another cylinder. While you are doing the work. Disconnect the battery. Drive it around after words if the misfire switches to that cylinder. Theres your problem...

Well, I got an extra set from a parts 84'. But I switched the trip but nothing. There is power going there. But it reads nothing, all blacked out. Thats the same with the speedo, mi, gas. They all don't work. I could have swore they all worked before it went to the transmission place. But when...

Hahaha

Ohh yeah, ill take both of those!

But its fast! Hahaha

Enough Said!