Mark in Corsicana, TX

Its paint is shot. All four bags are bad. Air comp is bad. Oil leaks like crazy from the front main. Drivers window don't work. Drivers seat don't move. Many broken parts inside. Bad ball joints. Needs a new battery.
I don't remember seeing HID housings but it is converted to SN95 bolt pattern and has a complete Cobra brake conversion.

Car is worth half what he wants.
 
It looks WAY better in pics. And those pics were when he just got it and had it detailed. It wont go back up now and is laying FLAT on the ground. The console lid, ashtray door, cupholder door and rear ashtrays are the only parts inside broken so if someone wanted a clean first gen black conversion its one way to go. :lol:
 
LaserSVT said:
It looks WAY better in pics. And those pics were when he just got it and had it detailed. It wont go back up now and is laying FLAT on the ground. The console lid, ashtray door, cupholder door and rear ashtrays are the only parts inside broken so if someone wanted a clean first gen black conversion its one way to go. :lol:
Click to expand...

My front comes up, but the a*s drags. Should I start looking at the rear bags, the height sensor, or somewhere else first? After researching, I was gonna start with the height sensor, then check the bags, then the lines & compressor. Is that what you would do?
 
NetKeym said:
My front comes up, but the a*s drags. Should I start looking at the rear bags, the height sensor, or somewhere else first? After researching, I was gonna start with the height sensor, then check the bags, then the lines & compressor. Is that what you would do?
Click to expand...
I would search the many threads detailing your issues. It all depends how it happens and what state the rear bags are in.
Jack up the rear, pull a bag (takes no tools and less then 5 minutes) and stretch it out. If you see even microscopic cracks then replace the bags.
90% of the time its bags. Neglect it and your compressor will fry. Good luck finding one.
 
I already have a 1st gen black on black, HID housings, etc, with shot paint. Explain why I want to make an offer on this.
 
MediumD said:
I already have a 1st gen black on black, HID housings, etc, with shot paint. Explain why I want to make an offer on this.
Click to expand...


The 5x4.50 bolt conversion and wheels. Might have more things maybe a one piece drive shaft.
 
i bought my 93 red with black int from fla perfict shape so clean under side you can eat off it and only has 70,000 miles on it for 2900.00
 
You must log in or register to reply here.

Members online

No members online now.
Total: 151 (members: 0, guests: 151)
Back
Top