Springtime car mods?

S

Screw-Rice

Dedicated LVC Member
Joined
May 31, 2005
Messages
1,041
Reaction score
0
Location
Colorado Springs, Co
I know I'm not the only one who has been gathering parts in preparation of the approaching "car season". So post up what you have in the works!

I have the following sitting in the garage, and should be going on next weekend.
-New wheels (18's), and tires
-Cobra dual piston calipers
-New Cobra hubs (front and rear)
-Cobra cross drilled/slotted rotors

Next round:
-Suspension rebuild (UCA's,LCA's, tie rods,etc)
-Addco 1.25" front and rear sway bars
-IRS brace, front suspension brace
-Subframe connectors possibly

Oh, and might be repainting the car by the end of the month. :lol:
 
1998 Black Mark:
-All new UCA, LCA's, and End Links
-Brembo Cross Drilled/Slotted Rotors and Ceramic Pads
-Send chrome wheels to powder coat "going black"
-Install 1 piece DS from Sapper "The Man"
-Trailer down to Gearheads and get tuned with the 4:10's
**thinking about a trans controller, still doing research....:confused:

1998 Midnight Gray:
-Order Some Chassis Equip. from Saturn and Install
-Got all new UCA, LCA, Bushings, and End Links that will be here on Tues.
**Got my guys at Orielly's to price match everything of RockAuto with Discount :)
-Asham8 Currently being assembled, installed upon arrival (Can't Wait!)
-Re-tint all windows and windshield, like how Jaime's looks..
 
Mark8Murder said:
1998 Black Mark:
-All new UCA, LCA's, and End Links
-Brembo Cross Drilled/Slotted Rotors and Ceramic Pads
-Send chrome wheels to powder coat "going black"
-Install 1 piece DS from Sapper "The Man"
-Trailer down to Gearheads and get tuned with the 4:10's
**thinking about a trans controller, still doing research....:confused:

1998 Midnight Gray:
-Order Some Chassis Equip. from Saturn and Install
-Got all new UCA, LCA, Bushings, and End Links that will be here on Tues.
**Got my guys at Orielly's to price match everything of RockAuto with Discount :)
-Asham8 Currently being assembled, installed upon arrival (Can't Wait!)
-Re-tint all windows and windshield, like how Jaime's looks..
Click to expand...

So is the guy overseas still making the ASHAM? Thought I read he quit. Still think I want to order one.
 
+1 -my red 98 that gman has air ride thinking about it as well the asham.... but so many ideas but not enough time...
 
One piece drive shaft
new tires for my 19s
mufflers cut off straight pipe already done last weekend
w3z2 already installed

gears and trac loc are coming shortly
 
Mark8Murder said:
Yeah, talked to him last week. He's still building them. Takes a week to make and 2 weeks shipping from what he said.
Click to expand...

Good to hear. Just creates the issue of me spending even more money. :lol:

I have officially spent more in mods, then I have on the purchase price of the damn car. :lol:
 
Screw-Rice said:
Good to hear. Just creates the issue of me spending even more money. :lol:

I have officially spent more in mods, then I have on the purchase price of the damn car. :lol:
Click to expand...

Oh trust me....... I'm there on both cars lol
 
1997 Blue Mark
-New wheels (18's), and tires (Cobra R deep dish 18x9 255/45)
-Fix the fuel sender
-Bushing hell for the IRS and K-member
 
got a w3z2 on the way.
chrome 10 spokes to be mounted.
and then start saving for 4.10s and a trac lok.
 
Screw-Rice said:
Sometimes I almost wish I was one of those people who just looked at cars as a tool to get around, and nothing more. However, that would mean I would be a very lame person. :lol:
Click to expand...

I've had that same thought! But we would be pretty lame and possibly driving smart cars.
 
My 97 LSC is getting a huge facelift outside this coming week, cant say what yet, its a secret! putting my new tires on the car, installing my new pumpkin with tracloc and 4:30's thats in my garage, then handing diesel dan my tracloc 3:73 pumpkin, i have my valve covers at the stripper getting the factory black e-coat melted off, powdercoating them a mini texture red, i have a lightly ported and polished gen 2 intake thats going to the powdercoaters with the valve covers to get done gloss black, already have my black cobra throttle body waiting, lowering my front end another 3/4 of an inch, installing my new computer from KK with an SCT tune, removing my sniper tuned computer, fabricating a set of rear sub frame to IRS cradle brackets, will have them powdercoated also, taking out my single 6 channel amp and installing 2 new kicker amps, replacing my jl 10w0's with jl 10w3's, re-doing the whole trunk, new box, amp racks, and some hidden led lights. and i am still unsure but i may take off my magnaflow mufflers for a pair of corsa's, but my brother in law said his were way too loud on his 05 gt so not too sure yet. i am also gonna rebuild the front end and get it over with.
My 98 LSC is gonna get some new mufflers and another buff job for the wife and thats it!
 
Mark8Murder said:
I've had that same thought! But we would be pretty lame and possibly driving smart cars.
Click to expand...

I said lame, not gay. :lol:

Jamie- your mini wall of text hurt my eyes. Paragraph structure buddy! :p :lol: Sounds like you have quite a bit going on. I have a few more things in the works...
 
Screw-Rice said:
I said lame, not gay. :lol:

Jamie- your mini wall of text hurt my eyes. Paragraph structure buddy! :p :lol: Sounds like you have quite a bit going on. I have a few more things in the works...
Click to expand...

i got your paragraph right here! come polish my helmet.
 
well i feel bad for married guys like that, because mine gets plenty of use still, no problems there........ yet

in fact, i need to calm down a little before we end up with another little one, we dont want that!
 
BAD97LSC said:
well i feel bad for married guys like that, because mine gets plenty of use still, no problems there........ yet

in fact, i need to calm down a little before we end up with another little one, we dont want that!
Click to expand...

Too much info there mister. :eek:

No kids, and no wife = less stress and more money for cars. :p
 
Got 4.30 ring and pinion and trac lock in the closet...got the 93 one piece driveshaft in the downstairs closet...got a glitch ballast behind my pillow waiting for a non working neon ballast to come in the mail...got a carputer downstairs waiting for a touchscreen monitor and sct tuning software...waiting for materials to build a custom cowl and grille...saving up for a high stall converter, 255 pump, meziere electric water pump, cobra intake, and a 125 wet kit...
 
meziere electric water pump- savage is running one but is it really worth the money .....compared to a stock water pump
 
Nothing perf from me..

I have planned:

f+r brakes
front susp
tint
full stereo redo


Starting my first project next weekend, installing new alt from dbelec and doing the big 3.
 
You must log in or register to reply here.

Members online

No members online now.
Total: 607 (members: 0, guests: 607)
Back
Top