Where can i buy rubber coil spacers

[JOKER613]

I was told that putting rubber coil spacers would prevent my rims from rubbing
where could i get it online?

 

[02V8Sport]

http://www.summitracing.com sells them

http://store.summitracing.com/partd...rt=MRG-1281&N=700+4294881596+115&autoview=sku

you may have to cut them to get them to fit. Jack up the car and shove these in between the coils.

 

[beaups]

Another method that might work is somehow installing washers or a bushing under the bump stops on the shocks (effectively lengthening them)

 

[Quik LS]

I use Howe spring rubbers - > http://www.pitstopusa.com/SearchResult.aspx?CategoryID=1295

 

[JOKER613]

how many do you install just one on each side in the rear

http://www.speedwaymotors.com/p/689,154_Rubber-Coil-Spring-Spacer.html

i also found this 1" thick but do these one raise your car or do they just support the springs i don't want my ride looking funny

 

[Quik LS]

Typically - you would only use one per spring - however use as many as you need to

The link you posted is the cheap stuff - forget about those....

Use the link I posted - and decide on the pressure - 10 - 15 - or - 20 lbs - to stiffen.

I purchased one 20lbs for each corner - then cut and tie wrapped them into the spring.

 

[JOKER613]

so i just cut straight up one side of the spacer and any tie wrapped will do and is it better to do so?

thanks alot quick ls

 

[Quik LS]

right you are.

 

[JOKER613]

The Spacer You Post

The spacer on that link are they going to lift the car and will they fit the stock spring on the LS

 

[20BlackLS00]

Wouldnt it be easier to run up to autozone and grab some, i used a grinder to grind mine down a little to get them into the space easier only like 5 bucks for 4 spaces i ahve 2 spacers in each coil

 

[20BlackLS00]

Wouldnt it be easier to run up to autozone and grab some, i used a grinder to grind mine down a little to get them into the space easier only like 5 bucks for 4 spaces i ahve 2 spacers in each coil