kustomizingkid
Dedicated LVC Member
KK, how exactly did you get the side mouldings off? There's a car I want to take some off of at the U-pull-it place out here, and I don't want to break them in the process.
Thanks.
I used a pocket knife with a 3" blade and started at the front end of each moulding and cut and pried... I WOULDN'T do it that way again but all I had was a pocket knife.
I would go get some windshield cutting wire and use that to cut the adhesive... they are simply attached with double sided foam adhesive. Note there are 3 pins the will get in your way as you pull the wire through to cut the adhesive... when you hit one of those just lift the moulding and slide the wire under it.
The reason I went on the trip was to meet Mafioso and Tiff and Tommy in person and go to the strip.... the junkyard was a fun side trip.