k9t8m
Rollin' Twankies
What kind of options do we have for valve covers for Gen 1? I was thinking about actually taking off the beauty covers to show the jewel underneeth, but want a different look. Post pics of what you have. Thanks
Valve cover options
- Thread starter k9t8m
- Start date
Sal329
Dedicated LVC Member
vr4
Dedicated LVC Member
you know we have a DOHC right?
96mark8
Dedicated LVC Member
http://www.jegs.com/p/Ford+Racing/763307/10002/-1/11355
painting is the way to go thow if you ask me. this does say for 1997 and up thow but i bet they would still work.
painting is the way to go thow if you ask me. this does say for 1997 and up thow but i bet they would still work.
Sal329
Dedicated LVC Member
BAD97LSC
Dedicated LVC Member
Toph i solved my same dilema with my 98, i powdercoated mine chrome, i also did chadly's ford blue, and jesse from lod i did his red and his intake red, i have valve covers in my shop i can powdercoat or you could take yours off and not drive the car for awhile and send em, or just paint yours, but powder holds up way better than paint, i also did my 98's intake chrome too, and chadly's intake i polished it then powdercoated it chrome, his was smooth as glass.
vr4
Dedicated LVC Member
you omitted the rest of the info
This Product Fits the Following Vehicles: Live Help
1996-2005 Ford Mustang
* 1996-2004: 8Cyl 4.6L GT
* 1996-2005: 8Cyl 4.6L "GAS, FI, VIN X, MFI" GT
* 1996-2001: 8Cyl 4.6L "GAS, FI, VIN V, MFI" SVT Cobra
* 2000-2000: 8Cyl 5.4L GAS, FI, VIN "H", MFI SVT Cobra R
* 2001-2001: 8Cyl 4.6L "GAS, FI, VIN X, MFI" GT Bullitt
* 2003-2004: 8Cyl 4.6L "GAS, FI, VIN "R", MFI" Mach I
* 2003-2004: 8Cyl 4.6L "Supercharged, GAS, FI, VIN "Y", MFI" SVT Cobra
the mustang GT is a SOHC. those are SOHC valvecovers. they are incorrect in their fitment chart.
kustomizingkid
Dedicated LVC Member
Damn Jamie!
That red turned out amazing, the intake looks sweet!
That red turned out amazing, the intake looks sweet!
BAD97LSC
Dedicated LVC Member
that intake SUCKED to do lol it was so hard to blow the powder in between all the runner tubes, i used alot of powder on that intake but it did come out awesome. looks even better in person.
kustomizingkid
Dedicated LVC Member
How much would you charge to do one of them for someone?
Roadboss
Dedicated LVC Member
Here is another way to go with Gen 1
Cobramarkviii
Active LVC Member
I want that setup in my lincoln, what did that cost to Do all that? That looks awsome, will it fit under a stock hood of a Gen 2?
Markviiiedrea
Speed Bump
I like Road boss's intake manafold, sweet!
Dark_Majesty_06
Active LVC Member
Whats that thingy on top? I don't have that.. can I get that on mine?! LOL.. Jk.. i wish I could have that set up.. I just want the sound of a blower.. nah.. then i'd want the power.. then i couldn't afford tires.. then i'd wind up breaking stuff everyday.. I just wish I was rich enough to have that blower.. lol
k9t8m
Rollin' Twankies
Those valve covers are sweet Jamie. Ill definatley be getting ahold of you soon about those.
I like those Ford Racing coil covers, to bad I dont have COP's.
I would ike to find out where to get the oil cap thought.
I like those Ford Racing coil covers, to bad I dont have COP's.
I would ike to find out where to get the oil cap thought.
Roadboss
Dedicated LVC Member
The Ford Racing stuff is from Max at 5 Star. Those aren't coil covers either see the spark plug wires. If you are going to use both as above you will need to clearance on corner of the cover itself with a radius grind to clear the oil cap.