torque converter help

[MarkOfDeath]

The torque converter is not locking up, I was driving and I notice the temp was higer then normal, So then I noticed the converter was not locking up, what should I check first, The fluid is still red its a little dark but its probly just dirty, Now Im guessing it might be the TCC sensor, but I dont want to drop the pan to look and a replace if it aint the problem because Im sure I would get the blinking OD light, any help would be great

Also the trans is a 99 with my 94 eletronics so I when I moved the TCC from one trans to the other I didnt replace the o-ring on the sensor so that might be it, also I have a edge racing 3500 stall so you know

 

[MarkOfDeath]

bump

 

[driller]

Do you mean Torque Converter Solenoid? That's what I'm thinking.

 

[MarkOfDeath]

wont that trigger the OD light blinking

 

[driller]

wont that trigger the OD light blinking

No, the blinking OD light indicates a problem with the electronic pressure control solenoid or circuit.

 

[MarkOfDeath]

oh thats good to know, i just got one ordered from NAPA, IDKW but I went autozone first and the guy was trying to order me a new TQ CON, what a :q:q:q:qhead

 

[driller]

Let's hope that cures it. :burnout: