I bought a $40 fuel pump motor off of ebay and finally got everything swapped out. I put everything back together just as I took it apart and tried to fire it up. All I got was a sputter and then nothing. Every time I turn on the ignition I hear the pump prime in the rear with no problems but it seems like it still isn't getting any fuel.
The gas cap is on tight, all of the fuses have been checked. I checked both fuel lines coming out of the top of the lid to the fuel pump and there was no leakage. I also made sure that everything was connected and tightened properly on the pump module itself. But what I did notice is this and I am not sure if this is supposed to be this way or not.
I removed the engine cover and unscrewed the little cap to what looks like a tire valve. I assumed that this valve was for the fuel line pressure and I would hear something letting me know that things were trying to work. No go. I depressed on it all the way with a long screw and nothing. No hiss, woosh or nothing. I'm stumped.
This car has been down since December and I need to get it back running ASAP so somebody, anybody please help me out.
The gas cap is on tight, all of the fuses have been checked. I checked both fuel lines coming out of the top of the lid to the fuel pump and there was no leakage. I also made sure that everything was connected and tightened properly on the pump module itself. But what I did notice is this and I am not sure if this is supposed to be this way or not.
I removed the engine cover and unscrewed the little cap to what looks like a tire valve. I assumed that this valve was for the fuel line pressure and I would hear something letting me know that things were trying to work. No go. I depressed on it all the way with a long screw and nothing. No hiss, woosh or nothing. I'm stumped.
This car has been down since December and I need to get it back running ASAP so somebody, anybody please help me out.