Rear Wheel Moldings from Mark 8 Muscle

[Legend1]

Hey everyone I wanted to let everyone know of the our new kit and I have listed our description below.
Temple Performance Cars introduces our Rear Wheel Molding Replacement Trim Kit for Lincoln Mark VIII's that require the wheel lips to be trimmed to
accommodate the wider 275+ tires. Our kit consist of trim that is the exact
type used as OEM equipment on the 93-98 Mark VIII's but reduced in width to 7/16 compared to the original 11/16. You simply cut the rear wheel lip down to where the spot welds start and install our new trim. Cut to length and ready to install. This will give you the clearance needed with the wider
tires preferred by most Mark owners." Priced at $24.95 for a complete kit
(shipping $4.50)

John Temple
Mark 8 Muscle
www.templeperformancecars.com

 

[LaserSVT]

Son of a bitch! I was just thinking about this the other day as I sliced my fingers while trying to trim mine.


John, you are coming out with great and clevar things for our cars and so far your prices are excellent on everything and the quality of parts is first rate.
So very glad to have you in this game.

Only thing you guys have that makes me scratch my head on price is the stick conversion. Then again I have never attempted one so there is prolly much more work then I think that goes into them.

Other then that I will be doing much buisness with you after you get the noses ready. I am still tickled to death with how nice your center caps are.

 

[manish]

^ ditto! Nice innovative products!

 

[Raped Ape]

Son of a bitch! I was just thinking about this the other day as I sliced my fingers while trying to trim mine.

Yeah I too had you in mind after reading your thread alittle while ago bout you trimming yours back and I said Bill will probably get this

And that must be 2 different Marks for the sample pics, or one with 2 sets of rims on it, D/S side has a chrome speedstar and the P/S has a painted speedstar

 

[Raped Ape]

John, on the 6 spd package, is there a price option for parts needed and I do my own install? Thanks Bill

 

[1994MarkVIII]

I had something similar on my rear fenders but when I put my wheels on they got rubbed off by the tire.

 

[ford nut]

John, on the 6 spd package, is there a price option for parts needed and I do my own install? Thanks Bill

Call him, super nice guy, but last I checked no parts for sale. "SC" pedals are a tough find.

I do have a idea in the works for a hyd. setup made from a "copy" SC clutch pedal.
Need time is all.
You can adapt a cable system from a new edge mustang.
But it's not the best, it has issues I am told.
Its not a bolt on swap, lots of fab work is involved.
I think his swap is spendy because its a 6 speed, he uses only the best parts, and its done in a "shop".

Top notch I have no doubt, its nice stuff.

Not tossed together with junk yard parts like I use


Rear Wheel Moldings:yourock:

Nice product Again!

 

[97 Octane]

John, In that picture of your gen2, Is that a 275mm wide tire on 18 x 9 Saleens?

 

[Buckeye68]

cool put a set in the box with my bumper I am waiting on.......

 

[phreakness]

Ok so I'm about to roll my fenders when I get my new rims. What does this do? If you cut the lip instead of rolling then, this product is like a rubber protector for the sharp cut edge?

 

[LaserSVT]

Ok so I'm about to roll my fenders when I get my new rims. What does this do? If you cut the lip instead of rolling then, this product is like a rubber protector for the sharp cut edge?

Just to give it a finnished look. If you cut them right there is no sharpness. I used a flap wheel on my grinder and just shaved them till I was happy. Took all of 30 minutes to complete.

 

[BIG ROLLER]

Like everybodey else here I am liking what you guys are doing over there at Temple.A very nice upgrade for sure.