Front has previously been confirmed to be 30mm (1 3/16"), Energy Suspensions part number 9.5171
Rear appears to be 19mm (3/4"); Due to the limited clearance, I believe that grease-able will NOT be an option and even if they would clear height wise, they wouldn't be accessible with a grease gun. So I'm ordering both sizes in the 19mm Diameter (non-grease-able): Small one is 9.5123; Large one is 9.5106.
From what I could see of the mounts, I'm expecting the small one to work; but it's easier to have both on hand and just return one of them than have to put everything back together and reorder.
I'll report more when I receive and start the install on the bushings, but it appears that it MAY be necessary to drop the rear sub-frame at least a little. I'm hoping this isn't the case but keep that in mind. I'm leaving Friday night for seven days, so I won't be able to do anything with it until then.
Rear appears to be 19mm (3/4"); Due to the limited clearance, I believe that grease-able will NOT be an option and even if they would clear height wise, they wouldn't be accessible with a grease gun. So I'm ordering both sizes in the 19mm Diameter (non-grease-able): Small one is 9.5123; Large one is 9.5106.
From what I could see of the mounts, I'm expecting the small one to work; but it's easier to have both on hand and just return one of them than have to put everything back together and reorder.
I'll report more when I receive and start the install on the bushings, but it appears that it MAY be necessary to drop the rear sub-frame at least a little. I'm hoping this isn't the case but keep that in mind. I'm leaving Friday night for seven days, so I won't be able to do anything with it until then.
