posted this in the parts fs thread and got nothing

[zmt325]

car is a 1993
things i need
everything to repair the clock spring
a non cracked first gen grille it will be painted so weak chrome is ok
a good vcrm or 2
rear 1.25 sway bar addco
inner fender liners with all clips and all mounting points intact.

things i want. due to finances this stuff would have to be a steal right now.
tl and 3.73s
96-98 cobra intake and all hardware required to install
pretty much everything dlf makes for this cars rear suspension
cobra brake and hub conversion parts

 

[lincoln_lurker]

might not have gotten a reply because no one may have what you are looking for?

 

[zmt325]

might not have gotten a reply because no one may have what you are looking for?

 

[DieselDan]

Gotta pay to play. Just gotta go one piece at a time and just keep your eyes open for a deal here and there. I just got lucky with a lot of my stuff, don't have a lot of cash either, but if you are patient, you'll find what you are after. The other thing is too, you are after some pretty desireable items. :/. Good luck though...

 

[ratdog442]

here is your 3.73's

http://nashville.craigslist.org/pts/2408632783.html

not sure but your wheel wells covers could come from here:

http://nashville.craigslist.org/pts/2373684068.html

 

[zmt325]

http://nashville.craigslist.org/pts/2408632783.html

not sure but your wheel wells covers could come from here:

http://nashville.craigslist.org/pts/2373684068.html

thanks rd I had seen the 2nd gen on cl, called him about the wheels and the 2nd gen seats. left a msg about a week ago.

4.30 is to much gear for what i am trying to accomplish. would be fun with the right stall and tune but gawd the gas mileage. I am stuck on 3.73s

the #1 thing I need is a working vcrm.

 

[ratdog442]

thanks rd I had seen the 2nd gen on cl, called him about the wheels and the 2nd gen seats. left a msg about a week ago.

4.30 is to much gear for what i am trying to accomplish. would be fun with the right stall and tune but gawd the gas mileage. I am stuck on 3.73s

the #1 thing I need is a working vcrm.

Also time to take a r/t to centerhill if he is not answering.

meant to give you this link:

http://nashville.craigslist.org/pts/2408764405.html

 

[marked8]

Good luck finding everything in one shot for the Cobra intake. You have to piece together everything you need.

 

[cadillackman]

I've got an intact passenger fender liner, come & get it. It's a 2nd gen but I don't think there's any difference.

 

[98lincmk7lsc]

There's a difference...

 

[Sapperfire]

I've got an intact passenger fender liner, come & get it. It's a 2nd gen but I don't think there's any difference.

theres a big difference in them